About These Instructions; Safety Instructions - Toors Indy Gt-R Sl Montageanleitung

Installation manual / Manuel d'installation / Montageanleitung / Návod na montáž / Installations manual

About these instructions

The following installation manual shows the main installation steps. The instructions are original instructions as described in the EC
Directive 2006/42/EC. They contain important information regarding the product. Please read and follow the instructions attentively.
In particular pay attention to all safety and warning notices.
Current regulations concerning injury prevention, environment protection as well as technical instructions for safe specialised work
are to be followed.
Keep these instructions in a safe place for further reference!
Warnings used
The general warning symbol indicates a danger that can lead to injury or death.
In the text the general warning symbol will be used with the caution levels described below.
! WARNING !
Indicates a potentially hazardous situation which, If not
avoided, could result in death or serious injuries.
Intended use
This industrial doors are intended for installation in locations with safe movement of people, goods and vehicles in industrial,
commercial and residential buildings. The doors can be operated manually or motorized.
General safety instructions
• The general warning symbol indicates a danger that can lead to injury or death.
• In the text the general warning symbol will be used with the caution levels described below:
• The field of application for this industrial system is explained in EN 13241-1.
• When the system is installed, attention must be paid to potential hazards as defined in EN 12604 and EN 12453.
• The door installer must ensure that the installation complies with the respective country-specific regulations.
• Installing, maintenance, repair and dismantling of the residential system may only be carried out by trained and qualified
person.
• All proportions in milimeters unless otherwise stated.
• Before the door is put into service, it must be tested to make sure that it is easy to operate manually, mechanically sound, in
perfect working order and also correctly balanced (EN 12604). Only then the user can be instructed.
• This manual may be completed by other manuals, e.g. spring break device, electric door drive manual (if included in the delivery
scope).
• After installation make sure that the CE marking label has been attached and hasn´t been damaged.
• Operation (Users) manual should be handed to the end user.
• This manual is subject to changes without (written) notice.
The fixing fasteners required to install the track set to the building are not included in this set. It is the responsibility of the
qualified door installer to make sure that the building structure (stone, concrete, steel, wood, etc.) is strong enough to ensure
a reliable construction. This may result in damage when the door is operated. Select proper fasteners. Consider weight of
INTRODUCTION

SAFETY INSTRUCTIONS

NOTICE
Damage due to improper fasteners
door leaf which can be found on door label.
2
NOTICE
Indicates a potentially hazardous situation which, If not
avoided, could result in damage or destruction of the
product.
SL