Steinberg NUENDO 8 I/O 96k Handbuch Seite 29

❐
The setting Clock INTERNAL D/A requires a synchronous operation of all devices. To guar-
antee this the external device connected to the Nuendo 8 I/O 96k has to synchronize itself
to the clock from the word clock output or ADAT/TDIF output of the Nuendo 8 I/O 96k.
The Nuendo 8 I/O 96k has to be master, all attached devices slave. To prevent a not
better but worse sound quality caused by imperfect or even no synchronisation, a
special method called SyncCheck compares the synchronicity of the incoming data
with the internal clock of the Nuendo 8 I/O 96k. The actual state is indicated by a blink-
ing (error) or constantly lit (Ok) ADAT or TDIF LED in the DIGITAL INPUT section.
In clock mode D/A INTERNAL, the clock choices EXTERNAL and INPUT of the A/D-sec-
tion do not make sense, as the clock at the digital output has to be synchronous to the
internal clock. Therefore A/D INTERNAL is automatically activated and cannot be
changed.
NUENDO 8 I/O 96k
Clock Section 29