Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REMOTE
CONTROL
FUNCTION
OF BUTTONS
The function
of the controls
on the remote
Indicator
This lamp blinks when the remote
operating. If the lamp does not light when any of the
function
buttons are pressed, the batteries
placed.
Siding cover
During playback, slide this cover over the record
button to prevent accidental recording.
Slide this cover down to prevent accidental
of recording.
Rewind
button
Press to rewind
the tape.
button
During playback, press to advance the tape three times
faster
than
normal.
FRAME
button
For frame-by-frame
advance of the tape.
During playback, press
button and then the FRAME
button.
Programme search button [PROGR.J
For selection
of the channels.
For lower
channels, press the
Side. For higher numbered channels,
press [+] side.
Pressing and immediately releasing this button witl
make
a one
channel
advance.
Keeping this button pressed will advance the Channels
he button
is released
C.,unneIS, on which the memories are erased in process
of the manual channel presetting
(see page 43), are
skipped.
• Duringrecording, t hechannel c annotbechanged. T o
change thechannel, p ressthePausebutton [ II Janci t hen
search a desired channel.
OPERATION
ON THE REMOTE COMMANDER
commander
is same as on the recorder.
commander
is
must be re-
During recording.
interruption
numbered
Transmitter
Point
towards
the remote
control
detector
recorder.
Record button [
Press to Start recording.
Fast-forward
button
Press to advance the tape rapidly.
Stop button [
Press to stop the tape transport.
Playback button
Press to play back the tape.
Pause button ( II
Press to stop the tape for a moment. The pause mode
will be released
after about 8 minutes
Picture
search
button
For high-speed playback in forward direction,
side. For high-speed playback in reverse direction,
side.
on
the
press
press
51
Werbung
