Download The App - Ksix Core 2 Benutzerhandbuch

insert the end of the strap so that when you let go of the
metal piece it fits into the hole.
1.5 Charging
The time to fully charge the Core 2 smartwatch is 2 hours.
The battery can last up to 5 days depending on the usage.
Use the 60 cm USB-A magnetic cable that is included in the
box to charge the smartwatch. Connect the USB-A
connector to a charger, computer output or power bank and
place the magnetic port in a way so that it sticks to the 2
golden pins located on the back part of the body watch.
1.6 Power on/off and reset
To turn on or off the smartwatch, press the button for 3
seconds. When turning off, 2 options will pop up: "Turn off"
or "Cancel". Choose the option you want.
You can also turn it off or reset from the System section of
the Settings.
1.7 About IP protection rating
The Core 2 smartwatch has an IP67 protection rating.
Disclaimer: Although the watch has an IP67 protection
rating, we do not recommend direct and prolonged contact
with water, or use in saunas or steam baths. We do not
recommend swimming in the sea or in swimming pools
(both fresh and salt water). In the event that this happens, it
is recommended that the watch be rinsed with fresh water
after immersion, due to the corrosive effect of chlorine or salt
water. If the watch has an auto-drain function, it is also
recommended to use it after rinsing.
2. Initial setup

2.1 Download the app

The Core 2 smartwatch compatible app is called Da Fit.
There are several ways to download it:
- Tap here to download the Da Fit app from Google Play or
App Store.
- You can also download the app directly by typing "Da Fit"
in the Google Play or App Store search engine.