x-sense STH51 Bedienungsanleitung Seite 6

5. FoI ow the prompts on the page by quickly pressing the Pair button
twice on the device until the LEDflashes blue rapid y, indicating that the
device is waiting to connect to the base station.
6. Tap "Next" to add the device. You will hear "Readyto add the device."
7 After successful y connected, you will hear "Device added" and the
"Device added" page wil appear. Then you can find the thermometer
hygrometer in the device list.
8. f you want to add multiple devices into the system, please repeat the
above steps.
NOTE:
1.If you fail to add the device to the network within 60 seconds, the
device will automatically exit the network configuration. To re-enter
the network configuration, you need to repeat the above steps.
2. After adding the thermometer hygrometer, write its name on the
provided sticker and attach it to the device for easy management in
the future.
08
Installing the Lanyard (Optional)
I .Open the back cover.
hread the anyard through the tab, making sure it is secure y attached.
2.
o
09