x-sense STH51 Bedienungsanleitung Seite 13

How do I set the temperature
Go to "Device Settings." Under the Temperature Alarm" and "Relative
Humidity Alarm" settings, select the temperature and humidity you want
to track by moving the slider or choosing from the dropdown list.
How do I export data?
o export data, start by tapping on the thermometer hygrometer on the
app's device page to access the data page. Once you're on the data page,
scroll down to the bottom and tap the "Export Data" button. Keep in mind
that you can on y export a maximum of 6 months (180 days) worth of data
at a time, so make sure the time span you select fal s within this range.
f you need to export data for the entire past year, you will need to do so in
two separate batches.
How do I calibrate the temperature and humidity?
he device has been calibrated by precision instruments and usual y does
not require recalibration. f you stil want to calibrate, you can go to "Device
Settings" and calibrate the temperature and humidity in the "Calibration"
setting.
and humidity alarm range?
22
How do I distinguish which device in the app corresponds
to the real device?
The box your device comes in contains stickers. After you add a device to
the app, abel it by writing its name in the app and on the provided sticker
and sticking it to the device.
To distinguish, use the app's test feature. To test the device, go to "Device
Settings" and select "Device Test." During the 10 seconds, the LEDlight
during the test will remain solid blue.
Environmental Protection
Wasteelectrical products shou d not be d"sposedof with
household waste. Pleaserecyclewhere facilities are avai able.
Pleasecheck with your ocal authorities or retai ers for
recycling advice.
Manufacturer and Service
X Sense Electronics Co., Ltd.
Address:Room 402, Building 4, No. 9, Jinshagang 1st Road,Shixia
Vil age, Da ang Town, Dongguan City, 523750 Guangdong, P.R. C hina
Emai :support@x sense.com
Information
23