x-sense STH51 Bedienungsanleitung Seite 10

LED Indicator
Status
Powering on
Wi-Fi connected successfu
y
Failed to connect to the W -Fi
Wi-Fi pairing mode
Alarm
Specifications of Thermometer Hygrometer
Power Supply
Vo tage
Battery Capacity
Product Life
Battery Life
Material
Alarm Volume
LED Indicator
The LED flashes red once.
The LED remains solid blue.
The LED remains solid yel ow.
The LEDflashes yel ovo.
The LED flashes red
2 x AAA batteries (Replaceable)
3 V DC
1,200 mAh
5 years
1 year
ABS
No sound when the temperature or
humidity exceeds or fal s below the set
evel (the base station will sound and an
app push notification wil be sent)
16
Indicator Light
Red/BIue
Operating Temperature -4—1
Operating Humidity
0 100% RH
Temperature Accuracy -4-320F
(-20-00C) (:tO.2-OAOC); Maximal accuracy:
32-1400F Typical accuracy: ±0.360F(±0.20C);
(0-6000
10
Humidity Accuracy
0 1096/90
100% RH
NOTE: The above humidity accuracy data is measured at a constant
temperature of 77OF(2500. When the temperature changes, the
accuracy may be affected.
Battery Replacement
1. Remove the back battery cover of the device using the bottom notch.
2. Instal the batteries. Ensure battery polarities are matched correctly.
3. Close the back cover by genty pressing it back into place until it clicks.
(-20—600C)
Typical accuracy: ±O.36-0.720F
±0.72 1.260F (±0.4-o.rc)
Maximal accuracy: 720F(±O.40C)
RH Typical accuracy: RH;Maximal
accura : RH
Typical accuracy:
Maximal accuracy: ±3.5-5% RH