Connecting
the Base Station to the Network
I .Connect the base station to a power source with the power adapter.
2. Tap "O" in the app, select "BaseStations", select "BaseStation (SBS50)"in
the product list, and then you will see the "Scan QR Code" page. Scan
the QR code on the bottom
of the base station.
3. Enter a name for the base station. Select the home you created or create
a new home for the base station, then select the room in which it is
instal ed. f you create a new home, you will need to enter a name and
select the country or region in which you live.
4. P ess and hold the Pair button
of the base station for 5 seconds until the
LEDindicator flashes yel ow rapid y, indicating that the base station is
waiting to connect to the Wi-Fi.
Press and
The LED indicator
will flash yellow
hold
for 5 seconds
06
5. Tap "Ope ation Confirmed" and then "Next." The page will show
"Searching for Nearby Bluetooth Devices."
6. Enter the correct Wi-Fi and password then tap "Next" to add the device.
You will hear "connecting to Wi-Fi."
7. After successful y connected, you will hear "Wi-Fi connected" and the
"Device Added" page will appear. The LED indicator will stay solid blue
and you can find the base station in the device 1st.
Connect the Thermometer
The thermometer hygrometer can be connected to the base station
through the wireless network. When the listener is connected to the base
station, you will receive push notifications wherever you are to stay
informed
of the device
status.
Note: Before adding devices to the system, make sure the base station
has been successfully added to the app.
.Tap "O", and select "Thermo hygrometers" in the product list. Then, tap
"Next" to enter the pairing page.
2. Enter a name for the thermometer hygrometer. Then, select the room in
which it is instal ed and tap "Next."
3. Remove the back cover from the device. Tap "Next."
nstall the battery and ensure the battery polarities are matched
4
correct y. Then, tap "Next."
Hygrometer
to the Base Station
07