Deleting A User Code; Termination Of Programming - Effeff 421-30-10 Handbuch

4 5
+

Deleting a User Code

An existing user code is deleted by switching on the programming
mode and pressing the key
respective code.

Termination of Programming

A programming procedure can be terminated in different ways.
Under certain conditions the door code unit changes automatically
from the programming mode into the normal mode:
A) If the programming mode is switched on and no key on the
keypad is pressed for fifteen seconds, the programming mode is
switched off automatically and the existing code remains valid.
B) If, after having entered at least two numbers in the programming
mode, no other key is pressed for four seconds, the programming
mode is switched off automatically and the new code is
programmed.
C) After all numbers of a new code have been entered, the key
may be pressed. In this way the new code is programmed and the
programming mode is switched off.
2 1
-
The code is entered.
Confirmation and switching off
the programming mode.
after entering the index of the
+
35