Simple Audio Roomplayer Schnellstartanleitung Seite 8

Activate your Roomplayer
• Connect your Roomplayer
Ethernet cable.
• Plug your Roomplayer Bridge into your wall socket and
power it on
• Press the pairing button and hold it down until the green
LEDs on the front flash. This will take approximately
12 seconds.
• Now you need to press this pairing button again, but this
time hold it down on y for 2 seconds.
button the green LEDs on the front will start flashing
Your Roomplayer Bridge is now inviting your Roomplayer to join the network.
Go to your Roomplayer
• Press and hold the pairing button on your Roomplayer for 2 seconds on y.
• When you release the button the green LED on the front will start flashing
• Your Roomplayer is now accepting the invite from your Roomplayer
Check that it is connected
The green LEDs on your Powerline Adapter and the green LED on your Roomplayer
go out when they are successfully
will also go out, which means that it is now connected
Bridge
Bridge to your router using the
When you release the
0000 z 0 :
paired The red LED on the front of your Roomplayer
PAIRING
BUTTON
Bridge.
to your network
STEP 3
Download the
desktop app to
complete setup
To complete the
setup of your
Roomplayer, download
the Simple Audio Roomplayer
application for your Windows or Mac
computer from:
simpleaudio.com/support/software
Once it's downloaded,
follow the onscreen prompts,
guide you through the software
installation process. A setup wizard will
also appear which, will help you to set
up your Roomplayer
music
Control it from
You can control what's playing on your
Roomplayer from your smartphone
tab et. Just make sure that your device
is connected
your Roomplayer. A list of the latest
apps and notes on compatibility
found on the Simple Audio website at:
will
simpleaudio.com/support/software
desktop
open the file and
which wil
and find your
other devices too
or
to the same network as
can be