Simple Audio Roomplayer Schnellstartanleitung Seite 7

STEP 2
Connect your Roomplayer
network
Power on your Roomplayer
Power on your Roomplayer
mains cable supplied. There is no on/off
switch, just attach the cable and plug it
into the nearest wall socket
Prepare your Roomplayer
Press and hold the pairing button on the
right hand side of your Roomplayer.
Hold it down until the green LED on the
front flashes. This will take approximately
12 seconds. The green LED will go out
when you release the button
0 00
GREEN
-RED
Choose
to your
OPTION
The fastest way to get set up is to
connect your Roomplayer
using the
Roomplayer
using the Ethernet cable provided.
one end of the Ethernet
socket on the back of your Roomplayer
and the other end into your router.
That's
Check
The red LED on the front of your
Roomplayer
that your Roomplayer
connected
PAIRING
BUTTON
PAIRING LED
LED
one of these options to connect
or
with Amp to your router
cable into the
it.
that it is connected:
will go out, which means
is now
to your network.
0
your Roomplayer to your router
OPTION
If your Roomplayer
Amp is across the room from your
router, or even in another room, and you
Plug don't want to ay down a long Ethernet
cable, you can use a Roomplayer
or a 200Mbps
connection method is very effective and
will keep your home free of wires
If you have a Roomplayer
Powerline Adapter, follow these
instructions to set it up right now:
or Roomplayer with
Bridge
Powerline Adapter. This
Bridge or
6