Simple Audio Roomplayer Schnellstartanleitung Seite 2

Important Safety Instructions
Please readthe following safety information before operating
your Roomplayer_
• Read these instructions
Keepthese instructions.
• Heedall wamings.
• Follow all instructions.
• Do not use the apparatus near water.
• Cleanonly with a dry cloth
Do not block any ventilation openings
• Install in accordance with the
Do not install the device nearany heat sourcessuch as
heaters,radiators or other apparatus that produce heat.
• Do not defeat the safety purpose of the polarised or grounding
type plug A polarised plug has two blades with one wider than
the other.A grounding type plug has two bladesand a third
grounding prong.The wide bladeor the third prong is provided
for your safety. Ifthe provided plug doesnot fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from beingwalked on or pinched
particularly at plugs, conveniencereceptacles, andat the point
where they exit from the apparatus
• Only use attachments/accessofes specified bythe
manufacturer.
• Unplugthe device during lightning storms or when unused for
long periods.
• Referall servicing to qualified service personnel Servicing is
required when the power supply cord or plug has been
damaged, liquid has been spilled or objects havefallen into
the apparatus,the apparatus has been exposedto rainor
moisture, does not operate normally,or has bean dropped
• Connectthe apparatus to a power supply only of the type
described in the operating instructions or marked on the
apparatus. Ityou do not know what type ot supply you have,
contact your dealer or energy supplier
• Usethe mains plug to disconnectthe apparatus from the
mains supply.The mains plug must be accessible at all times.
Usethe mains switch when the apparatus is not in use
• DOnot let Objectsor liquids fall into the device. DOnot expose
the device to dripping or splashing Do not place a vessel
containing liquid on top of the apparatus
• No naked flame sources should be placed nearto or on
the device
• The apparatus has been designedfor use in moderate and
tropical climates Ensure adequateventilation, do not stack
SYMBOLS
Explanationof symbols used in this manual or on the
rear/undersideof the apparatus:
This symbol is intended to alert the user to the presence
ot un-insulated dangerousvoltageswithin the enclosure
of sufficient magnitudeto cause electric shock.
instructions
This symbol is intended to alert the user to the presence
of important operation,maintenance and servicing
information
This symbol is intended to alert the user that the
equipmentshould only be used at an altitude not
exceeding2000m.
WARNING THIS APPLIANCE MUST BE EARTHED
Forapparatus connected to the mains electricity supply:
CAUTION
• To reduce the risk of electric shock, do not remove the cover.
• There are no user serviceable parts inside the products
• Referservicing to qualifiedservice personnel
• Replacethe mains fuse in the plug with one of the sametype
and rating
• Disconnectsupply cord before changing fuse.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. Shockhazard do not open. This
appliance should be connected to a mains socket outletwith a
protective earth connection
MAINS PLUG
This apparatus is suppliedwith a non-re-wireable mains plug for
the intended country Replacementmains leads can be obtained
from your retailer Should you need to change the plug please
disposeof it carefully. A plug with bared conductors is dangerous
if engagedin a live socket.
in the instruction and service manuals
• The Brown wire must be connected to the Live (Line)
supply pin
• The Bluewire must be connectedto the Neutra supply pin
• The Green/YeIIow wire must be connected to the Earth
(Ground)supply pin. Pleasecontact your retailer or a
competentelectrician if you are in any doubt. Referto the rear
or underside of the product for fuse and power consumption
information
FUSE REPLACEMENT
This appliance is tltted with a non-re-wireable mains lead.
Certain types of this mains lead (I-JK) contain a 5 amp fuse.
Ifthe fuse has blown itcan be replaced as follows:
a) Pull out the fuse cover/carrier trom the wall mounting
mains plug
b) Removeanddispose of the blown fuse.
c) Fit a new 5 amp BS1362approvedluse into the carrier and
push the carrier back into the plug
Always ensure the fuse cover is fitted Ifthe fuse coveris missing
do not use the plug. Contactyour local electrical retailer to obtain
a replacement fuse cover. Fusesare for fire protectionand do not
protect against electric shock
MAINS PLUG REPLACEMENT
Should your mains plug need replacing, and you are competent
to do this, proceedas follows. If in doubt,contact your electrical
retailer.
a) Disconnectthe plug from the mains supply.
b) Cut off the plug and dispose of it safely.A plug with bared
conductors is dangerousif engaged in a live socket.
c) Onlyfit a 13 amp BS1363Aapproved plug with a 5 amp fuse
d) The cable wire colours or a letter will be marked at the
connectionpoints of most quality plugs.
e) Attach the wires securelyto their respective points The
Brown wire must go to the Livepin, the Blue wire must go to
the Neutral pin, and the Green/YeIIow wire must go to the
Earth pin.
f) Beforereplacing the plug top ensure that the cable restraint is
holding the outer sheath of the cable firmly and that the wires
are correctly connected