Advanced Bionics Auria PowerCel Charger Bedienungsanleitung Seite 5

3. Connect the adapter to the Auria PowerCel Charger Power Supply,
CI-5610-002. Connect the cable from the power supply to the Charger
(Figure 3).
I
nsertIng the
Locate the slide tracks on the charger. Position the Auria PowerCel so that
the contact is facing the top wall where the pins reside. Slide the PowerCel
onto the charger until it engages (Figure 4). You can insert up to four
PowerCels in the charger at one time. The PowerCels will start charging
automatically.
A P
urIA ower
To adapter
To Charger
Figure 3
C
els Into the
C
hArger
3