Silvercrest STLK 8 D2 Bedienungsanleitung Und Sicherheitshinweise Seite 40

SilverCrest STLK 8 D2
You can also pre-chill the tap water in the fridge or fill the water reservoir (13) with ice cubes
for a better cooling effect.
CAUTION! Only use fresh, clean tap water or distilled water. Adding other substances (e.g.
essential oils) could damage the air cooler.
Insert the air filter (11) into the water reservoir (13), push both back into the housing (12) and replace
5.
the front panel (10) so that the closure flap on the front panel (1) clicks into place. First, feed the lug
on the bottom of the front panel with adjustable air outlet grille (10) into the recess in the bottom of the
front side of the casing then push the top edge of the front panel with adjustable air outlet grill (10)
against the housing (12) until it clicks properly into place.
The air cooler is now ready to use.
9.2 Operation
The air cooler does not indicate that the water reservoir is empty (13). So you should keep an
eye on the fill level display (9) and top up the water as necessary.
You can also use the device without water. In this case, it does not cool the air, it just moves it
around like a fan.
9.2.1 Establishing the power supply
How to connect the air cooler to the power supply:
Connect the mains power adapter (B) to a mains socket which meets the power adapter specifications
1.
(see Chapter 5, Technical specifications).
Then connect the cable connector (type USB-C) from the power adapter to the power input socket (6)
2.
on the back of the air cooler.
38 - English