BEHAbelt MultiTC Bedienungsanleitung Seite 20

Leave profile clamped for 5-10 min� within the guide
clamp to cool off�
After each welding procedure, the welding paddle
should be cleaned by using a belt rest piece or a
cotton cloth otherwise the welding is polluted and
can break� Do not use knife or hard objects as this
would damage the teflon coating�
Please follow the instruction manual� We recom-
mend your practise / exercise�
BEHA Innovation GmbH
In den Engematten 16 · 79286 Glottertal
Tel.: +49 7684 9070 · Fax: +49 7684 907 101
E-Mail: info@behabelt.com
Internet: www.behabelt.com
20
PBDBMTC00003 · 07/2024