Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1)
Cancel pairing with Intezze Wings Pro in your phone settings.
2)
Place both earbuds back into the charging case and leave the cap open.
3)
Hold both touch pads (L+R) for approx. 8 seconds.
4)
Once the LEDs flash red briefly, you can release the touch pad and reset is
complete. You will also hear the message "Reset successful" from the
earbuds.
C h a r g i n g
We recommend fully charging the earbuds and the case before the first use. The
earbuds will start charging automatically after inserting them into the case. This
does not apply if the case is completely discharged.
Charge the case by connecting it to a charger using the included USB-C cable
(charger not included). Charging time is about 1.5 hours depending on the
charger used.
C a u t i o n
1)
In order to connect the charging pins, it is necessary to first remove the
protective film from the earbud pins
2)
Fully charge the case together with the earbuds prior to first use.
3)
If you do not use the earbuds for a long time, charge them regularly
together with the case (1x per month) to avoid damaging the batteries
(shortening their service life).
5
EN
Werbung
