INTEZZE WINGS PRO Bedienungsanleitung Seite 3

F i r s t p a i r i n g o f t h e e a r b u d s
Before using the earbuds, first peel off the protective film from their charging
pins and then insert them back into the case.
partially charged in the case for pairing to be successfully activated.
1) Turn on Bluetooth on your phone.
2) Open the case and wait a few seconds for the pairing mode to activate (the
LED on one of the earbuds will flash alternately blue and red).
3) Search for "Intezze Wings Pro" in the available Bluetooth devices on your
phone and confirm the pairing.
4) After successful pairing, the LED on the earbud goes off.
S w i t c h i n g t h e e a r b u d s O N / O F F
Switching ON
Method 1: The earbuds turn on automatically when you open the charging case.
Method 2: With the earbuds switched off, hold both touch pads for about 5
seconds.The LED on the earbud flashes blue several times and the earbud says
"Intezze ON".
Switching OFF
Method 1: The earbuds automatically switch off when placed in the case and
closed. This does not apply only when the case is fully discharged.
The earbuds must be at least
2
EN