i-tec U3DUALHDMIDOCK Gebrauchsanweisung Seite 6

USB 3.0 Dual HDMI Docking Station
Download tab for this product, or go to www.i-tec.cz/setup.
the downloaded
For Windows 10, the docking station
automatically if your device has access to the internet.
Note: For Windows 7 / 8 / 8.1 / 10, install drivers as an Administrator.
flash while drivers are being installed; this is normal. Once installation is complete,
restarting the laptop / tablet is recommended.
INSTALLING DRIVERS
Do not connect
drivers. Drivers only need to be installed before first use. It is recommended to run
the latest macOS. Download the drivers from our website at www.i-tec.cz/setup
Download tab for this product.
HARDWAREINSTALLATION(CONNECTING THE DOCKTOA NOTEBOOK 1TABLET/ PC)
. Turn ON the notebook / tablet / PC and connect
station.
2. Connect the power adapter to the AC 100.0 V / 240.0 V mains.
3. Connect the USB 3.0 cable to the USB port type B on the back panel of the docking
station.
4. Connect the USB 3.0 cable to a free USB 3.0 / 2.0 port of your notebook / tablet /
5. Subsequently, the automatic installation of the ports in the individual systems will start.
6. After the completion
USING IN WINDOWS
Advanced configuration
Desktop and select settings for "Display settings", you can select here the resolution
frequency for monitor you want to use.
By clicking on the second monitor and moving it you can position this monitor as required
relative to the original monitor of your laptop / tablet / PC.
6 1ENGLISH
file, select your language and follow the instructions
ON MACOS
the docking station
of the installation
OS
for the graphics
your display
Related settirgs
can be connected directly;
X - ATTENTION!
to your Mac until you install
the power adapter to the docking
restart notebook / tablet / PC.
after connecting
Launch the installation
on the screen.
drivers will be installed
The screen may
the corresponding
the monitor, right-click
from
in the
on the
and