i-tec U3DUALHDMIDOCK Gebrauchsanweisung Seite 5

DESCRIPTION
1. 2x USB 3.0 type A ports —for connecting USB devices to the docking station; USB 3.0
Fast port also provides features in line with the BC 1.2 specification
2. lx audio jack for headphones
3. lx audio jack for microphone
4. 4x USB 2.0 type A ports —for connecting
5. lx Ethernet 10 / 100 / 1000 Mb/s GLAN RJ-45 port
network or internet
6. 2x HDMI port —for connecting
7. lx USB 3.0 type B port —for connecting
/ tablet / PC
8. lx power supply connector —for connecting a power adapter
SYSTEM REQUIREMENTS
Hardware requirements:
have USB 2.0, the data transfer
GHz and higher, 512 MB RAM.
Operating system: Windows XP SP3 / Vista / 7 / 8/8.1
14.04, 16.04, 17.04, 17.10, 18.04, 19.04, Android
• For playing a DVD on an additional
Pentium 2.0 and higher, 1 GB RAM and a screen resolution
16 colors.
CAUTION!
Charging: The docking
equipment such as smartphones,
and tablets (e.g. Asus, Toshiba, Dell, GoClever, Prestigio, Emgeton, Sencor). Simply
connect the equipment
docking station with the connected
Samsung tablets which are supported
BC 1.2 specification.
the computer/notebook and the inclosed power adaptor must be connected.
USB 3.0: Before the installation
recent drivers installed
PC). Products with the USB 3.0 SuperSpeed
however, the drivers for the supported equipment are still undergoing some fine tuning.
Your notebook / tablet / PC needs to be equipped with the USB 3.0 interface
can utilize the advantages
ensured by the chipset which needs to have the current drivers available.
Problems that you can encounter during the installation
are very often caused by the installed outdated drivers for the USB 3.0 controller or
chipset of your notebook
firmware Of the USB 3.0 port
manufacturers: Intel, Renesas (former NEC),Via (VLI), AS Media, Fresco Logic, Etron.
You can find the most recent drivers for the i-tec products on our website www.i-tec.cz/en
in the „Download" tab for the individual products.
INSTALLING DRIVERS ON WINDOWS 7 / 8 / 8.1 / 10 (32/64 BIT VERSION)
ATTENTION! Do not connect the docking station to your laptop / tablet until you install
the corresponding
installation, make sure your system uses the latest drivers for your device and its BIOS
is up-to-date.
To download drivers for Windows 7/8/8.1, visit our website at www.i-tec.cz and go to the
/ speakers
modem
monitors
notebook / tablet / PC with a free port USB 3.0 / 2.0. If you
speed will be reduced. Processor
monitor the processor
station supports
ebook readers, multimedia
you want to charge using the original cable to the USB port of the
power adaptor. The only exceptions
as well but only on the USB 3.0 Fast port with the
At the same time the docking
on the USB 3.0 port make sure that you have the most
for this port (for the USB 3.0 controller
Of the fast USB 3.0 equipment.
/ tablet / PC. Other problems
controller.
drivers. Drivers only need to be installed
USB devices to the docking
—for connecting to an Ethernet
the docking station to the USB port of a laptop
/ 10, macOS X, Linux Ubuntu
5 or later, Chrome
charging of the connected
station must be disconnected
technology have been used since 2010;
Its problem free function
or use of our USB 3.0 equipment
can be caused
Most frequently
Quick
station
Intel Pentium 1.2
OS R51 or later
shall be at least Intel
shall be 800x600 and
USB mobile
players, GPS navigations
are the Apple or
into notebook / tablet /
so that you
by outdated
it is one Of the following
before first use. Before
Start
from
is
ENGLISH 15