Azdome PG16 Bedienungsanleitung Seite 11

without assistance line.
Language Multilingual, default English.
Allow to choose your desired language for dash-cam system.
Frequency — 50HZ/ 60HZ(Default)
Here you should choose the frequency accordingly to your
power supply specification
your geographical location.
60 Hz (USA - North America)
50 Hz (Europe Most Asian Countries)
Screen Saver 1/3/5 minutes/ Off(Default)
1/3/5 minutes: The dash cam LCD screen will turn off after
1/3/5 minutes, but still recording.
Off: The dash cam LCD screen will always on.
G-Sensor — Off/ High/
G-Sensor is a 3-axis impact gravitational accelerometer which
is designed to detect physical and gravitational forces on the
camera. While Video is Being Recorded: In the event when
G-Sensor is triggered due to physical or gravitational impact
force on the camera,the current loop cycle length of video file
will be locked so it will NOT be deleted by loop cycle function.
EN-15
used in your country based on
Off
Backup Cam Mirror Image
On: The image on the dash cam screen matches that of your
rear-view mirror.
Camera Display Mode - Front Camera/Rear Camera/Front
and Rear Screen(Default)
Front Camera: Only Front camera image
RearCamera:Onlyrear camera image
Front and Rear Screen: Front and rear image will be shown
together on the screen
Timezone
This function menu will be
Module
Time/Date Setting
To set the date & time, please do as below:
(DPIease connect GPS module.
@Set the GMT/UTC time-zone value first.
@Set the Date/Time: Year-Month-DayHour-Minute
The dash camera will set the
GMT/UTC value selection when it receives the GPS signal
automatically.
On(Default)/ Off
shown when connected GPS
date and time based on the
EN-16