Azdome PG16 Bedienungsanleitung Seite 10

Video Time Lapse — On/Off(Default)
This function menu will be shown
Kit and ONLYworks when your car' s engine OFF.
Time Lapse recording mode allows you to capture specific
images per second at a much lower rate. So when you
combine and play those images at the normal 30fps rate,
everything seems to be moving faster in time lapse.
Timelapse Parking Monitor Setting — 2hours(Default)/
8hours/ 12 hours/ 24 hours
This function menu will ONLY be shown
hard-wire Kit.
Parking Monitor — On/Off(DefauIt)
This function menu will be shown
hard-wire Kit, if you want to 24hours monitor your car, please
do as below
(j)Set function "Parking Monitor" "Video Time Lapse" to ON
and "Timelapse Parking Monitor Settings" at 24 hours,
"G-sensor" at medium, AZDOME 3-Lead Hard-wire
installed properly.
@When you turn OFF the car' s engine and turn the keyto
the lock position. Then the camera will STOPthe continuous
video recording and it will go into the Video Time Lapse
EN-13
when connected hard-wire
when connected
when connected 3-lead
Kit is
recording mode automatically.
@WhiIe this timelapse is being recorded, If someone hits
your car, then the camera will lock the Video Time Lapse
recording, then saved in LOCKfolder of Micro SD card > then
go on Video Time Lapse recording.
@Now when you start your car for the next time, the camera
will automatically STOP the Video Time Lapse. Then it will go
into normal video mode automatically
video recording.
System Settings
Button Sound —
This feature allows you to turn ON/OFF camera button' s beep
sound & any voice confirmation.
Volume Off/ High/ Middle(Default)/ Low
Toswitch on/ off or adjust the beep sound.
Parking Assistance Line —
On: The function is activated when the reverse gear is
selected. The camera image is shown on the dash cam screen
with assistance line.
Off:The function is activated when the reverse gear is selected.
Thecamera image is shown on the dash cam screen but
to start the continuous
EN-14