Bauknecht KR 19G4 A2+ IN Kurzanleitung Seite 4

Read the Instructions for Use carefully before
using the appliance.
2
1
3
4
5
6
17
7
19
X X
8
13
9 18
10
11
12
14
15 20
16
1. External indicators of Power On and alarms
2. Control panel
3. Main LED's lighting
4. Fan
5. Lighting in Multi-flow*
6. Shelf divider*
7. Multi-flow cold air area*
8. Bottle rack *
9. Sensor cover
10. Zero degrees drawer*
11. Rating plate with commercial name
12. Cooler compartment (best for meat and fish)
13. Area shelves
14. Fruits and vegetables crisper
15. Crisper divider *
16. Door reversibility kit
17. Egg tray*
18. Bottle holder*
19. Door trays
20. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply,
the display lights up and all the icons appear on the
display for approximately 1 second. The default (factory)
values of the freezer compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may vary
from model to model
QUICK START GUIDE
POWER ON (EXTERNAL LED) indicator
An external green LED showing that the appliance is switched ON.
It automatically turns off when opening the door.
FAST COOL indicator
ON/STANDBY indicator
PROFRESH
This function automatically works to ensure the
optimal conditions to preserve the stored food. To
deactivate the ProFresh, press and hold Vacation
and Stop Alarm buttons at the same time for 3
seconds until an audible signal sounds and ProFresh
icon turns off as confirmation that the feature has
been deactivated. To reactivate this function repeat
the same procedure.
Note: Deactivation of the function switch-off the FAN
in the fridge.
FAN
The Fan improves temperature distribution inside the
product, allowing better preservation of stored food.
By default, the fan is switched on. To switch off the
FAN press and hold Vacation and Stop Alarm
buttons at the same time for 3 seconds until an
audible signal sounds and ProFresh icon will turn
off as confirmation that the fan has been switched off.
To switched on the FAN repeat the same procedure.
As a confirmation audible signal sounds and the icon
turns on.
ALARM TYPE Signal
Door open alarm The acoustical alarm is activated and the Alarm Indicator
Malfunction The letter "F" blinks on the display (°C)
NL FR DE
GB
TEMPERATURE
DISPLAY
ON/STANDBY button TEMPERATURE button
To put the product in Stand-by, press Press the Temperature button
the temperature: the value changes cyclically
and hold the button for 3 seconds.
All the icons turn off except On/ between 8°C ad 2°C.
Standby indicator . To reactivate Note: Displayed set points correspond to the
average temperature throughout the whole
the appliance press once (briefly) this
button. (see the Instructions for Use). refrigerator.
FAST COOL button
Using Fast Cool function it is possible to increase the cooling capacity in the refrigerator
compartment. The use of this function is recommended when placing a very high quantity of food
in the refrigerator compartment. Press the Fast Cool button
When activated, the Fast Cool indicator turns on. The function is automatically disabled after
6 hours, or can be manually disabled by pressing Fast Cool button
ALARMS TABLE
Cause
blinks. The door has remained open for more than 2 minutes
Product malfunction.
ALARM (EXTERNAL LED) indicator
This red LED can blink to show the occurrence of an alarm or a failure even when the
door is closed. Please open the door and check on the internal Control Panel which
alarm/failure is occurring.
ALARM indicator (see the below Alarms Table)
VACATION indicator
VACATION button
This function can be activated to reduce the energy
consumption of the appliance during a prolonged
period of time. Before activating the feature, all
perishable food should be removed from the
refrigeration compartment and make sure that the
door is closed properly, since the refrigerator will
maintain a suitable temperature to prevent the
formation of unpleasant odors (+12°C). To activate/
deactivate press the Vacation mode button for
3 seconds. When the function is enabled, the
related symbol will light up and the temperature of
the refrigerator compartment will be set to a higher
setpoint (the temperature display will show the
to change
new temperature setpoint of +12°C). Changing the
temperature setpoint will automatically deactivate the
function.
STOP ALARM button
Press in case of alarm to mute the acoustic alarm.
to activate Fast Cool function.
again.
Cure
Close the door or press the Stop Alarm to mute the acoustical alarm.
Contact the After-sales Service
EN
19514698000