Proscenic OptClean P12 Bedienungsanleitung Seite 13

Troubleshooting
Fault
The machine
cannot be started.
Vacuum cleaner
has no suction/
suction becomes
smaller.
Dust is leaking
from the air outlet.
The roller brush
stops turning, and
the floor brush
blockage indicator
lights up in red.
The full dust
indicator lights
up in red.
Note:
•This vacuum cleaner must be used with the original battery and power adapter.
• Do not use the battery for any purpose other than this vacuum cleaner.
Specifications
Vacuum Cleaner Specifications
Working Voltage
Battery Capacity
Rated Power
Adapter Rated Input
Adapter Rated Output
Possible Issues
The battery is not installed correctly
The battery is dead
The dustbin is full
The suction of the dust pipe or floor
brush is blocked by a foreign body
Dustbin or HEPA is not
installed correctly
Filter HEPA blockage
HEPA is not installed correctly
The roller brush is entangled or
stuck, resulting in protection
The dustbin is full
25.9V
2500mAh
400W
100-240W50/60Hz
31.OV 0.6A
Solution
Please install the battery correctly
Charge the battery
Please empty the rubbish in the
dustbin
Clean up the suction of the dust
pipe or floor brush
Reinstall the dustbin and HEPA
Clean and filter HEPA, dry it and
put it back
Install HEPA correctly
Clear the winding or blockage
and turn it back on
The dustbin needs to be
dumped
EN
10