Cycplus AS2 Pro Max Benutzerhandbuch Seite 5

Operation
O Connect the air valve
A. Connect the nozzle directly to the valve
Adjust the nozzle mode and connect
it to the valve. Keep a tight grip on the
nozzle while inflating.
Note
Always loosen
the nut first.
O Power on and set target air pressure
Long-press the Power button to power on,
and the screen illuminates, showing the
real-time air pressure reading,
Press '+' and
PSI and BAR, Adjust target pressure using
and buttons The set pressure will display
for 3 seconds before reverting to current
pressure.
O Inflating
Press the Power
shut off when the target air pressure is reached,
O Shut down
Long-press the Power Button to power off If the air
pump is not started and there is no operation within
1 minute while it is powered on. the air pump will
automatically shut dowrL
together to switch between
Button to start inflation.
B. use the hose
Hold the hose and the suitable adapter,
then connect
it's recommended
using Schrader valve.
For Schrader Valve
For Presta
It will auto
03
it to the valve,
to use the hose when
Valve
For Ball Valve
Pressure
Value
Pressure
unit
Battery