The devolo Magic adapters offers two different va-
riants for transmitting these encryption keys:
WPS using WPS pushbutton
1
Start
the
encryption
devolo Magic adapter
a
By pressing the Wi-Fi button on the front
side of the device or
a
By pressing the corresponding Start button
on the user interface under Wi-Fi
Pushbutton.
2
Then either press the WPS key of the Wi-Fi
device you are adding or enable the WPS
WPS via PIN
To interconnect Wi-Fi devices in your wireless net-
work securely using a PIN variant, go to the web in-
terface and, under Wi-Fi
the WPS PIN generated by your Android smart-
phone or tablet and start the encryption process by
pressing the corresponding Start button.
Use of the WPS method implies the use of the
WPA/WPA2
encryption standard.
When the WPA3 encryption standard is
process
on
the
enabled, the WPS function is not available for
technical reasons.
WPS
Therefore take note of the following automatic
settings:
b
Network configuration 42
mechanism in the Wi-Fi settings of the Wi-Fi
device. Now the devices exchange their encryp-
tion keys and establish a secure Wi-Fi connec-
tion. The Wi-Fi LED on the front panel indicates
the synchronisation process by flashing.
WPS
or
WPA2
You can find more information in Chapter
4.4.2 Wi-Fi networks
If under Wi-Fi
Wi-Fi networks, the No
encryption option is selected in advance,
devolo Magic 2 WiFi 6
WPS PIN, enter
or
WPA2/WPA3