Beyerdynamic AMIRON 100 Bedienungsanleitung Seite 9

� When you clean the cerumen protective grid (e.g. with
a cotton bud or brush), the cerumen should be dry
and the protective grid should point to the floor so
that loosened cerumen residue does not fall into the
earphone.
TROUBLESHOOTING
Problem Cause
AMIRON 100 cannot
� Battery is empty
be switched on or almost empty.
No audio output No Bluetooth®
�
connection.
AMIRON 100 does
AMIRON 100 is
�
not appear among turned off.
the available Blue-
� AMIRON 100 is
tooth® devices on not in the pairing
the player
mode.
There exists
�
a Bluetooth®
connection to
another play
already.
Playback volume
� The received
is too low, despite
audio signal is
the volume of too low.
AMIRON 100 is set to
maximum
The sound is sharp
The sealing of
�
and the bass the earphone is
response is too low
not sufficient.
The wireless range
� There are inter-
is too low or the ferences with
connection is
other devices.
disrupted
HELP WITH PROBLEMS / FAQ
Answers to more most common problems and
questions can be found on the internet at:
https://www .beyerdynamic .com/faq
PRODUCT REGISTRATION
Using the serial number, you can register your
AMIRON 100 on the internet at:
https://www .beyerdynamic .com/service
DISPOSAL
This symbol on the product, in the operating
�
instructions or on the packaging means that
electrical and electronic devices must be
disposed of separately from household waste
at the end of their life cycle.
AMIRON 100 — True Wireless Earphones
�
For sale within the EU only:
�
�
Solution
� Charge the
battery.
�
Pair AMIRON 100
�
with the player.
Turn on
�
AMIRON 100.
Battery disposal
� Put AMIRON 100
into the pairing
�
mode.
Disconnect the
�
Bluetooth® con-
nection to the
other player and
connect AMIRON
100 to the desi-
�
red device.
� Increase the
Non-destructive removal of the battery by the end
playback volume
user is not possible with this product. Please contact
on the player to
beyerdynamic or consult independent specialists.
maximum.
Select suitable
�
eartips on the
right and left
EU DECLARATION OF CONFORMITY
until the sound
is ideal.
� Move away from
The company beyerdynamic GmbH & Co. KG hereby
WLAN routers
declares that this radio transmission device complies
and microwave
with the EU Directive 2014/53/EU.
ovens.
Make sure that
�
�
your body is not
between the
player and
AMIRON 100.
TECHNICAL SPECIFICATIONS
Bluetooth® frequency range
Transmitting power
(Bluetooth®)
Charging temperature range
Operating temperature range
Input earphones
Input charging case
�
Always dispose of used equipment in accordance
with applicable regulations.
For the return of old equipment, there are free
collection points or a free return to beyerdynamic,
as well as other acceptance points for reuse. The
addresses are available at the local city or municipal
administration.
Dealers for electronic equipment are generally
obliged to take back waste electrical/electronic
equipment free of charge. This obligation also
applies to sales via remote communication.
For further information, please contact the local
authorities or the dealer from whom the product
was purchased.
Dispose of batteries separately from the product
after use in accordance with the applicable
regulations. They must not be disposed of with
household waste. Returning batteries is free of
charge.
Discharge the batteries before disposal.
You will find the full text of the EU declaration of
conformity on the internet at:
https://www .beyerdynamic .com/cod
More detailed information on the technical
specifications can be found on the internet at:
https://www .beyerdynamic .com
9
2.402 – 2.480 GHz
< 7 dBm (EIRP)
0 to +45 °C
-10 to +45 °C
DC 5 V / 85 mA
DC 5 V / 500 mA