Pairing
Open the lid of the
1
charging case while the
two earphones are inside
and press and hold the
pairing button for
5 seconds (
) until the
status LED flashes blue
and red alternately.
Select "AMIRON 100" from
2
the pairing list of the
playback device.
Google Fast Pair®
Open the lid of the
1
charging case while the
two earphones are inside
and press and hold the
pairing button for
5 seconds (
) until the
status LED flashes blue
and red alternately.
Place the earphones in
2
pairing mode close to a
fast-pair-capable
smartphone.
Tap "Connect" on the
3
smartphone.
AMIRON 100 — True Wireless Earphones
1
2
1
2
3
Multi-point operation
AMIRON 100 can be paired with up to six devices via
Bluetooth®. An active connection is possible with a
maximum of two devices at the same time.
Music playback and phone operation is only possible
with one device at a time. Phone operation has priority
over music playback, i.e. music playback is interrupted
when a call is received.
The following priority list applies to the use of playback
devices (PD):
Priority
Profile
1
HFP (phone operation)
2
HFP (phone operation)
3
A2DP
(playback of music)
4
A2DP
(playback of music)
Setting up multi-point
First pair the AMIRON 100 with two playback devices as
described in the "Pairing" chapter.
As soon as AMIRON 100 is connected, it can automati-
cally switch between the two playback devices.
This is how you connect your playback devices for the
first time:
1. Open the Bluetooth® settings of the first playback
device and connect it to the AMIRON 100.
2. Open the Bluetooth® settings of the second playback
device and connect it to the AMIRON 100.
Using multi-point
Media playback active /
accept call
Hang up / start media
playback again
Delete pairing list
While the earphones are
�
in the charger, hold the
button on the charger for
approx. 8 seconds until
the LED on the charger
flashes blue.
6
Playback devices (PD)
PD 1 (device used first)
PD 2 (device used
second)
PD 1 (device used first)
PD 2 (device used
second)
Briefly tap the touch pad
once ( )
Briefly tap the touch pad
twice (
)