elco REMOCON PLUS 2 Technische Anweisungen Seite 34

User Menu
– On the home page press the "Menu" button
the user menu.
– The display will show the user menu consisting of two pag-
es.
Page 1
1
Zones Time program
management
Holiday function System operation
modes
Page 2
1
Connectivity System info
Advanced
settings
– Turn the selector to highlight the desired menu.
– Press the selector to access the selected menu.
– To access the second page, turn the selector and scroll the
cursor past the last icon of the first page.
34 / EN
Zones management
to access
The zone menu allows the user to view general information
and to configure the main settings of the zones.
The system allows the user to view up to 6 zones.
Consumptions
history
DHW settings
Fig. 18
By selecting the single zone, the following information will be
available:
Screen settings
Fig. 19
– Turn the selector
– Press the selector
– Turn the selector
– Press the selector
OPERATION MODE
Allows for selecting the zone's operating mode.
– "OFF": the zone is in anti-freeze protection mode. The
– "Manual": the set-point temperature is maintained for 24
– "Time program": the room temperature of the zone fol-
Zone 1 Zone 2
20° SET 21° 20°
,5 ,5 ,5
Zone 4 Zone 5
20° SET 21° 20°
,5 ,5 ,5
Zone 1
Operation mode
Zone name
Room T setpoint
Time program
to highlight the item to be edited.
to enter the edit mode (the field to
be edited is highlighted in green).
to set the desired value.
to confirm.
room protection temperature is set to 5°C by default.
hours.
lows the time schedule profile for the zone.
Zone 3
SET 21° 20° SET 21°
,5 ,5 ,5
Zone 6
SET 21° 20° SET 21°
,5 ,5 ,5
Fig. 20
Time program
Zone 1
16,0°C
>
Fig. 21