Recharging The Batteries - Spypoint KIT6V-12V Bedienungsanleitung

recHarGinG tHe BatterieS

1. Slide the power switch located inside the case to
12V/CHARGE.
2. Connect the AC charger to the 12V CHARGER
plug on front of the case.
3. The light will turn from red to green to indicate
that the battery is fully charged. The charger will
automatically stop recharging when the green light
appears.
Note: When the AC charger is connected to the case,
there may be up to 1 minute delay before the green
light turns red to indicate that the battery needs to be
charged.