LD Systems ANNY 8 Bedienungsanleitung Seite 6

ATTENTION:
1. Do not install or use the device in the vicinity of radiators, heat accumulators,
furnaces, or other heat sources. Ensure that the device is always installed in such a way
that it is sufficiently cooled and cannot overheat.
2. Do not place ignition sources such as burning candles near the device.
3. Ventilation openings must not be covered, and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or impact to the device.
6. Observe the IP protection class as well as the ambient conditions such as temperature
and humidity according to the specification.
7. Devices can be continuously further developed. In the event of deviating information on
operating conditions, performance, or other device properties between the user manual
and the device labelling, the information provided on the device always has priority.
8. The device is not suitable for tropical climates or for operation at heights of 2,000 m or
more above sea level.
CAUTION:
Connecting signal cables can cause significant interference noise. Make sure that devices
connected to the output are muted while making connections. Otherwise, noise levels may
cause damage.
ATTENTION: HIGH-VOLUME AUDIO PRODUCTS!
This device is designed for professional use.
The commercial operation of this device is subject to the applicable national regulations and
guidelines for accident prevention.
Hearing damage due to high volume and continuous exposure: use of this product may
generate high sound pressure levels (SPLs) that may cause hearing damage. Avoid exposure
to high volumes.
RADIO SIGNAL TRANSMISSION (for example, W-DMX or audio radio systems, Bluetooth):
The quality and performance of wireless signal transmissions generally depends on the
ambient conditions.
For example, the following factors can impact range and signal quality:
• Shielding (for example masonry, metal structures, water)
• High volumes of radio traffic (for example powerful wireless LAN networks)
• Interference
• Electromagnetic radiation (for example LED video screens, dimmers)
All range specifications refer to free-field line-of-sight applications without interference!
The operation of radio transmission systems is subject to official regulations. These may vary
from region to region and must be checked by the operator before use (for example radio
frequency and transmission power).
6