Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6 Initial use
1.
Place the atomiser in the atomiser bracket. Ensure that the atomiser is
aligned with the red marks provided for guidance.
2.
Place the atomiser along with the bracket in the base and route the cable
through the hole provided for this purpose. Ensure that the rubber stopper
is firmly in place, so that water does not leak later.
3.
Then place the glass lid over the atomiser unit.
14
4.
5.
6.
English
English
After this, place the base into the frame. Ensure that the base is firmly sea-
ted and does not wobble.
You can then fill the tank. Note that the maximum capacity of the diffuser is
1200ml. This value must not be exceeded. If you want to use a fragrance, we
recommend you to add about 2-3 drops of the fragrance to 1200ml of water.
You can then connect the power adapter to the diffuser. The device is now
ready to be used. To start the device, press the "ON/OFF" switch provided
on the cable.
15
Werbung
