Cleaning And Maintenance - Samsung SR8845 Benutzerhandbuch

Safety information
IN USE
Robotic vacuum cleaner cannot completely clean
locations that it cannot reach, such as corners, and
NOTE
spaces between sofas and walls.
- Please clean these locations occasionally.
Dust clusters may remain after cleaning, when the robotic vacuum cleaner fails to
pick up dust clusters that were formed while cleaning.
NOTE
- In this case, sweep up the dust with another cleaning tool.

CLEANING AND MAINTENANCE

When cleaning the product, do not spray water directly onto the
exterior or wipe it with a volatile material such as benzene,
CAUTION
thinner or alcohol.
- This may result in critical damage to the product.
Do not forcefully press the bumper on the robotic vacuum
cleaner.
CAUTION
- If the bumper sensor gets damaged, the robotic vacuum cleaner may
bump into walls or furniture.
The unit must not be disassembled or reconstructed by anyone
other than a qualified service engineer.
CAUTION
- This may result in damage to the product.
Remove any foreign substances accumulated on the Obstacle
and Cliff sensors on a regular basis.
WARNING
- Dirt accumulated on the sensors will result in inaccurate functioning
of the sensors.
Cliff sensor
Obstacle
sensor
Safety information _11