Masterpro The Drop Bedienungsanleitung Seite 5

C L E A N I N G T I P S
Stainless Steel Bucket
1. Regular Cleaning: Wash the stainless steel bucket with warm
soapy water using a soft sponge or cloth. Rinse thoroughly with
water and dry immediately to prevent water spots.
2. Polishing: For extra shine, polish the stainless steel surface
with a stainless steel cleaner or a homemade solution of vinegar
and water. Apply with a soft cloth in the direction of the metal
grain.
3. Avoid Abrasives: Never use steel wool or abrasive brushes as
they can scratch the stainless steel surface. Stick to non-abrasive
tools and cleaners.
4. Handling Stains: For stubborn stains or fingerprints, use a
paste of baking soda and water applied gently with a soft cloth.
Rinse and dry as usual.
5. Rust Spots: If you notice any small rust spots, gently rub
them with a paste made from baking soda and water, then rinse
and dry. Consider using a stainless steel rust remover for more
stubborn rust, following the manufacturer's instructions.
Acacia Wood Stand
6. Wiping Down: Clean the acacia wood stand with a damp
cloth and mild dish soap. Avoid soaking the wood in water.
7. Drying: After cleaning, dry the wood stand immediately with a
soft, dry cloth to prevent warping or cracking.
8. Oil Treatment: Periodically, treat the acacia wood with a food-
grade mineral oil or a wood conditioner. Apply a thin layer of
oil using a clean, soft cloth, allowing it to soak into the wood to
maintain its luster and prevent drying out.
9. Avoid Direct Sunlight: Store the acacia wood stand away
from direct sunlight, as prolonged exposure can fade and
weaken the wood.
10. Protect from Heat: Do not place the wood stand near heat
sources like stoves or heaters. Extreme temperatures can cause
the wood to warp.
11. Stain Removal: If the wood gets stained, gently sand the area
with fine-grit sandpaper, moving in the direction of the grain,
and then reapply a coat of mineral oil.
EN
Drop cover
· 8 ·
P R O D U C T
W A R R A N T Y
Dear customer,
We thank you for choosing our products and share your commitment
to quality and exceptional performance. To ensure we provide you
with the best experience, we offer a limited warranty covering
manufacturing defects and operation for the following period:
Warranty period: As per the applicable laws in the country of
sale - minimum 2 years.
Warranty coverage: This warranty covers manufacturing defects
and operation, but does not cover breakage, loss, normal wear
and tear, or problems arising from improper handling. Please
contact our technicians to verify if your case is covered.
Procedure to enforce the warranty or request a replacement:
• Warranty case:
Contact our technical support team through
the form at the following QR link and select
Returns, Refunds, and Warranty.
• The following information will be required:
· Full name.
· Full address: Postal Code - Country - State.
· Contact phone and email.
· Precise details of the warranty case.
· Photo of the purchase receipt.
· Detailed images of the product and, if applicable, the
damaged part.
• In the Product Information section, you will need to specify:
· Purchase date.
· Product description.
· How the product was acquired.
· Store.
· Point of sale.
· Product reference (if available, it is found on the barcode).
· Description of the defect.
· 9 ·
EN