Safety Information For Reciprocating Saws - Parkside Pssa 20-Li C3 Originalbetriebsanleitung

GB MT
d) Under abusive conditions, li-
quid may be ejected from the
battery; avoid contact. If con-
tact accidentally occurs, flush
with water. If liquid contacts
eyes, additionally seek medical
help. Liquid ejected from the battery
may cause irritation or burns.
e) Do not use a battery pack or
tool that is damaged or modi-
fied. Damaged or modified batteries
may exhibit unpredictable behaviour
resulting in fire, explosion or risk of in-
jury.
f) Do not expose a battery pack
or tool to fire or excessive tem-
perature. Exposure to fire or temper-
ature above 130 °C may cause explo-
sion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the tem-
perature range specified in the
instructions. Charging improperly
or at temperatures outside the spe-
cified range may damage the battery
and increase the risk of fire.
6. SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never service damaged bat-
tery packs. Service of battery packs
should only be performed by the man-
ufacturer or authorized service pro-
viders.
Safety information for
reciprocating saws
• Hold the power tool by insu-
lated gripping surfaces, when
performing an operation where
28
the cutting accessory may con-
tact hidden wiring. Cutting ac-
cessories contacting a "live" wire
may make exposed metal parts of the
power tool "live" and could give the
operator an electric shock.
• Only use accessories recom-
mended by PARKSIDE. Unsuitable
accessories may cause electric shock
or fire.
Further safety instructions for
reciprocating saws
• Keep hands away from the
sawing area. Do not reach under-
neath the workpiece. Upon contact
with the saw blade there is a risk of in-
jury.
• Only when the power tool is
turned on should the sawing
blade be moved against the
workpiece. Otherwise, there is a risk
of kickback if the attachment tools jam
in the workpiece.
• Make sure that the footplate
is secure during sawing. A tilted
saw blade may break or cause a kick-
back.
• After you have finished work,
turn the power tool off and do
not pull the saw blade out of
the cut until it has come to a
standstill. In this way you will avoid
any kickback and can safely put down
the power tool.
• Use only undamaged saw
blades in perfect condition. Bent
or blunt saw blades can break, ad-
versely affect the cut or cause kickback.
• Do not brake the saw blade
after switching the device off
by applying side pressure. The
saw blade may be damaged, break or
cause a kickback.