How To Use - Taurus Polar Invisible Gebrauchsanweisung

Connect the battery/s into their housing,
respecting the indicated polarity.
Close the battery compartment cover
again.
It is essential that the batteries are of the
same type and charge, never mix alkaline
batteries with normal (carbon-zinc) or
rechargeable ones.
IMPORTANT: During the battery
replacement process, the device
configuration will be erased, making it
necessary to reconfigure the device
parameters.

How to use

USE
Start the device by pressing the button (2).
Select the desired speed (1).
TIMER FUNCTION
You can control the operating time of the
device.
To program an operating time simply
select it by pressing one of the timer
buttons (4). You can program 1h, 2h, 4h
or 8h.
After the selected time has passed, the
device will stop automatically.
AIR FLOW MODE
Pressing the button (6) will change the air
flow to natural mode.
This mode is designed to provide a feeling
of breeze, increasing and decreasing
speed.
CHANGING THE DIRECTION OF
TURNATION
The device has a button (3) that allows
changing the direction of rotation of the
blades.
Summer function:
The blades rotate counterclockwise. The
movement of the blades generates a soft
breeze that reduces high ambient
temperatures and provides a pleasant
sensation of freshness.
Winter function:
The blades rotate clockwise. In this way,
the fan pushes the hot air accumulated on
the ceiling of the room downwards,
balancing the temperature of the room
and creating a cozy climate.
LIGHT
Pressing the button (5) to turn on the light.
To change the color, press the button (5).
IMPORTANT: When turning the light on
and off, if it takes more than 10 seconds to
turn it back on, the same color will remain.
If you take less than 10 seconds, the light
color will change.
AFTER USE IS COMPLETED
OF THE DEVICE
Stop the device by pressing the start/stop
button (2).
Cleaning
Unplug the device from the mains and let
it cool before starting any cleaning
operation. Clean the appliance with a
damp cloth soaked in a few drops of
detergent and then dry it.
Do not use solvents, or products with an
acidic or basic pH factor such as bleach,
or abrasive products to clean the device.
Do not submerge the device in water or
other liquid, or put it under the tap.