Remote Control - Taurus Polar Invisible Gebrauchsanweisung

(Original instructions)
E N
CEILING FAN
POLAR INVISIBLE
Description
A – Ceiling support
B - Body + blades
C - Ceiling support trim
D - Short/long suspension tube
E - Body trim
F - Light
G - Lamp trim
H – Remote control
I – Remote control receiver
J - Remote control support

REMOTE CONTROL

1 - Speed 1/2/3/4/5/6
2 – On/off button
3 – Change of direction of rotation
4 –Timer 1/2/4/8 hours
5 – Light
6 - Airflow mode button
If your device model does not have the
accessories described above, these can
also be purchased separately from the
Technical Assistance Services or from the
website www.taurus-home.com
USE AND CARE
Do not use the device if its accessories
are not properly attached.
Do not use the appliance if its start/stop
device does not work.
Make sure to stop the appliance before
carrying out any cleaning operation.
Store this appliance out of the reach of
children and/or people with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge.
Keep the device in good condition. Check
that moving parts are not misaligned or
stuck, that there are no broken parts or
other conditions that could affect the
proper functioning of the appliance.
Installation
Be sure to remove all packaging material
from inside the device.
Make sure that the device is
unplugged from the mains before starting
any installation or assembly operation.
Remove the motor from the packaging. To
avoid damaging the housing surfaces,
mount the motor on a soft surface.
In order to avoid electric shock, make sure
that the power supply has been previously
disconnected.
The electrical installation must be carried
out in accordance with current regulations,
connecting the fan to ground as a
precaution against possible electric
shocks. It is recommended that the
installation be done by a professional.
Install the fan at a minimum distance of
2.50 meters from the ground or other
objects.
FAN INSTALLATION
See "FAN INSTALLATION" at the
beginning of the instruction manual.
In the package you will find the material
for fixing the support to the ceiling. This
material is not suitable for depending on
what type of roof. Ask a professional and
use the fixing means that you think are
most appropriate.
INSTALLING THE BATTERY/S
Warning: During the process of handling
the battery, do not touch its two poles
simultaneously, as this would cause a
discharge of part of its stored energy,
directly affecting its longevity.
Remove the battery compartment cover.
Verify that the protective plastic sheet has
been removed from the battery(s) (there
are batteries that are supplied with a
protective sheet)