Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly instructions
9
4
5
303 56
+ 3 0147
8
7
6
9
3
2
1
9
4
5
303 56
+ 3 0147
8
7
9
3
2
1
Connecting track + Black Box
1
Lane change section left input
2
Lane change section left output
3
Lane change section right input
4
Lane change section right output
5
Pit Lane entry switch
6
Pit Stop Adapter Unit
7
8
Pit Lane exit switch
Infrared sensor:
9
The infrared sensor MUST be located on the switch
that functions as the entry rail (dark diode).
8
9
The letterig "FUEL" on the Pit Stop Adapter Unit must be readable
in driving direction.
Pit Lane for Pace Car function
1
6
9
9
2
In order to be able to use the Pace Car- and Pit Stop function at the
same time, two Pit Lanes are required (see fig.
It is not possible to extend the Pit Lane in the Pit Lane (see fig.
the second Pit Lane switch cannot be triggered!
A standard straight should always be positioned between the entry-
and exit switch.
Maintenance and care
1
To ensure a proper operation of the motor-racing circuit, all race-
track components should be regularly cleaned. Pull the plug prior
to cleaning.
Racetrack: Keep the track surface and track slots clean with a
1
dry cloth. Do not use any solvents or chemicals for cleaning. When
it is not in use, store the racetrack in a clean and dust-protected
location, preferably in the original cardboard box.
Important information
ExCLUSIV
EVOLUTION
1
).
) as
2
Carrera DIGITAL 124/132
Werbung
Kapitel
Inhaltsverzeichnis
