Product Description; Prior To Use - Rehau RAUWORKS FRONT Betriebsanleitung

PRODUCT DESCRIPTION

Composition
The RAUWORKS front mechanical lifting door module consists of the
following elements:
- Lifting door
- Two counterbalance modules and synchronisation
- Cabinet carcass to which the lifting door module has been fitted
Figure 1
The counterbalance module and synchronisation are integrated into
the cabinet carcass.
The lifting door is connected to the counterbalance module via a track
system and a counterbalance mechanism.
10
Technical data:
Dimensions/Weight (without cabinet carcass)
Depth 85 mm
Width 1200 - 1800 mm
Height 900 - 1200 mm
Weight 60-115 kg
(depending on the size and design)
Construction principle
Aluminium frame plate-finish (decorative framing is carried out
individually by the customer)
Acoustically effective rear wall with fabric covering
Front with optional acoustic effect or whiteboard
Counterbalance and synchronisation using a toothed belt
Height adjustment
Individual, continuous height adjustment (mechanical)
Stroke length 750 or 1050 mm
Max. traverse force: 15 N
Acoustic efficiency
Sound absorption surface 1.7-2.5 m² (100-5000 Hz)*
according to ISO354
(reverberation chamber)
* Test with acoustic version of the lifting door 900 x 1800 mm (open)
Environmental conditions
Ambient temperature + 10 °C to + 40 °C
Operating environment Indoors (office environment).
Do not operate in damp
environments.

PRIOR TO USE

Scope of delivery
The RAUWORKS front mechanical lifting door module is supplied
fully-assembled.
The assembly is carried out by specialist personnel of the furniture
manufacturer or the distributor.
Any leftover packaging materials are disposed of by the office furniture
manufacturer.
Checking the product
Check the product for damage.
If the product is damaged, please contact the distributor or manufac-
turer that you purchased the product from.
Setting up
a. The cabinet must be brought into a horizontal position prior to
commissioning.
b. Remove the carcass cover (see associated information from the
cabinet manufacturer) and remove the transport lock.
c. To do this, pull out the locking lever (see illustration 2) and prevent
it locking again by turning 90°. The RAUWORKS front mechanical
lifting door module cannot be opened without removing the
transport lock.
d. The transport lock must be activated for further transport. To do
this turn the locking lever 90° until it locks and the weight is fixed
in its position.
e. Fix the carcass cover back into place.
f. Remove the protective foil from the whiteboard (only applies for
the whiteboard version).
Figure 2
Warning!
The transport lock must always be activated when the cabinet is being
transported.
11