Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Humidification Mat Replacement
Use only the original mat supplied by authorized dealers!
Turn the device off and disconnect the power supply
Proceed as follows to change the humidification mat:
1. Turn the device off and disconnect the power supply.
2. Lift the upper main unit and empty the bottom water
reservoir.
3. Remove the humidification mat.
4. Insert the new humidification mat.
5. Place the upper main unit back on the lower water
reservoir and ensure that it is placed securely and
correctly.
Cleaning and Care
Proceed as follows to clean the device:
1. Turn the device off and disconnect the power supply.
2. Lift the upper main unit and empty the bottom water reservoir.
3. Remove the humidification mat.
4. Rinse the bottom housing with warm water and clean it with a soft cloth.
5. Place the upper main unit back on the lower water reservoir and ensure that
it is placed securely and correctly.
6. Clean the outer surface of the humidifier with a slightly damp cloth.
Useful cleaning information
Use a solution of 50:50 vinegar and water or a 3:1 solution of vinegar essence
and water. Do not use abrasive or corrosive cleaners.
Daily Maintenance
Always fill the bottom housing with cold clean water. Clean the bottom housing
with warm water and a soft cloth once every 2 to 3 days.
before replacing the mat.
User Manual ecoQ HumidAir H400+ | 79
Werbung
