Ronix RP-0100 Bedienungsanleitung Seite 26

Machine pulsating
Machine often starts
and stops by itself
Machine starts, but no
water comes out
|
24
Induction Pressure Washer
- Air in inlet hose
Inadequate supply of
mains water
- Nozzle partially blocked
water filter blocked
- Hose kinked
Pump/spray gun is leaking
Centre
- Pump/hoses or
accessory frozen
- No water supply
- Water filter blocked
- Nozzle blocked
Allow machine to run with
open trigger until regular
working pressure resumes
- Check the water supply
corresponds to specifications
required
- Avoid using long, thin hoses
(min1/2")
- Clean the nozzle
- Clean the filter
- Straighten out hose
Contact your nearest Service
- Wait for Pump/hoses or
accessory to thaw
- Connect inlet water
- Clean the filter
- Clean the nozzle