Ronix RP-0100 Bedienungsanleitung Seite 20

- Fit the lance into the gun and rotate it until the two parts are completely locked.
- Connect the gun to high pressure hose.
- Connect the high pressure hose to the water outlet on the washer.
Outlet
- Connect the water supply hose to female coupler. Then connect to
the water inlet of the washer. The supply hose must have an internal
diameter of at least 13mm (1/2 in) and must be reinforced. the water
supply must be at least equal to the washer delivery capacity.
|
18
Induction Pressure Washer