Welcome to use this Bluetooth stereo headset, J46BT. Please read this user’s manual carefully before use. Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range wireless communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices.
3) Easy to switch between the call and music, you will not miss the incoming call during listening to music. 4) Every time the headset is turned on, it will connect to last connected device automatically. Note: In order to complete above function, the Bluetooth profiles of paired device must be same as the headset.
2. Charging for headset The headset comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the headset is low power, the headset emits five “Dong” tones every 5 minutes and the red LED flashes instead of blue LED.
“Yes” (this will vary among cell phone models); 5) After successful paired, choose and connect “J46BT” from the list of devices shown on cell phone; 6) After successful connecting, blue LED of headset will flashes twice...
Every time the headset is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the headset with the new device according to steps 1~6 mentioned above. 3.
Seite 8
mobile phone Transfer During a call Long press MFB about 2 conversation to seconds headset Microphone During a call Long press volume up “+” mute button about 2 seconds Cancel mute During a call Long press volume up “+” (microphone mute) button about 2 seconds Voice dial Standby mode...
Functions Status of headsets Operation Answer new call and There second Short press end current call incoming call once Answer new call and There second Double click MFB retain current call incoming call button Switch calls Keep conversation Double click MFB button End current call and Keep conversation...
You have to select “transmit the sound via Bluetooth” in the settings menu and then choose “J46BT” as speaker device. The music will be transmitted to the headset. Please refer to your mobile phone’s user’s manual for further information.
Bluetooth devices. Care and maintenance Read the following recommendations carefully before using J46BT. Following these you will be able to enjoy this product for many years. Keep it dry and don’t put it in the dump place to avoid the product’s ...
Specifications Bluetooth version Bluetooth V4.0 Bluetooth profiles Headset, Hands free, A2DP, AVRCP Operating distance 10meters Headset music time About 4 hours Headset talk time About 4.5 hours Headset standby time Approx 150 hours Charging input DC5.0V 60mA Headset charging time About 2 hours Dimension 14.5*35*32.6mm...
Seite 13
équipements électriques et électroniques. Vous pouvez consulter la déclaration de conformité à la section Support de notre site Web, à l’adresse www.jbl.com. environmental performance of batteries and all operators in the supply chain.