Werbung
After completing the treatment:
• Wipe off the remaining Radio Frequency Gel from the
treated area.
• Apply a high-factor sunscreen (at least 30 SPF)
and protect from sunlight for two weeks following
treatment.
• Avoid any usage of hot water on your face and discontinue
usage of abrasive or harsh products for two days.
• Makeup or moisturisers may be applied immediately as
required.
• Ensure the device is clean and dry before storage.
For best results
For long-lasting results, use the device once a week on
each target area for a period of 8 weeks.
To maintain optimal long- term results, treatments may
be performed as needed every 4-8 weeks.
What the different lights mean
Blinking
green light
Treatment
Solid green
indicator
light
Solid orange
light (for 5
seconds)
R F
Solid red
light
RF energy
level
1-3 energy
indicator
levels lights
R F
10
The device is ready. RF
energy is activated, skin
contact is detected,
but the effective skin
temperature is not yet
reached.
The device is treating
the skin. RF is activated,
skin contact is detected,
the desired temperature
is achieved and the
treatment is progress.
5 minutes of treatment are
completed. Move on to a
new area if desired.
The device is in error
mode. A malfunction has
occurred and prevents the
delivery of the RF.
When the green light is
on, it indicates that the RF
energy is active. Touch the
RF energy level selection
button repeatedly until
you reach the desired
level: 1, 2, 3 or off.
Cleaning & Storage
Always ensure the device is turned off and unplugged
before cleaning. It is recommended to wipe off any
remaining Radio Frequency Gel with a soft damp cloth.
Do not use alcohol or alcohol wipes.
Possible Adverse Effects
When using the device according to the Instructions for
Use, adverse effects are rare. However, every aesthetic
procedure, including the usage of home-use devices,
may cause some degree of adverse effects. Mild effects
include skin irritation, redness, swelling and sensitivity.
Mild adverse effects should be spontaneously relieved
within a few hours.
Moderate and severe effects are rare but can include
burns, pigmentation changes, bruising, blistering and
infection. If adverse effects appear, stop using the device
and consult with your physician if necessary.
Troubleshooting
If you experience any problems with your device, please
refer to the information below to attempt to resolve it:
If the device does not turn on:
• Make sure that the power cord is plugged properly into
the electrical outlet and into the device power socket.
• Make sure the power outlet has power.
If you cannot feel heat:
• Check that the device is in full contact with the skin
(indicated by the green light).
• Check that you applied enough Radio Frequency Gel.
• Remember that the device reacts to your skin and may
temporarily reduce heat for safety reasons.
The device has switched off while using:
• The device will switch to standby mode when left
unattended for 45 seconds.
• Switch off the device, unplug from the wall. Wait for
the device to cool and then switch on again.
• If the device will not switch on again, it may be faulty.
Please contact CurrentBody customer services.
11
Werbung
