Joyetech CUBOID Bedienungsanleitung

Manufacturer: Joyetech (Shenzhen) Electronics CQ,Ltd
Address: IF, 9th Blvd, Changxing High Tech Industry Zone,
Shajing Town, Baoan District, ShenZhen, China
Email: service@joyetech.com (after sale)
info@joyetech.com (wholesale)
Web: www joyetech.com
510 Spring Loaded Connector
Fire Button
How to Use:
1. Power on and off: Press the fire button 5 times in quick succession
Note: Should you get stuck while upgrading your device, just press "+" button and insert into the reset hole (on the
bottom) with a neddle to restart.
2. Vaping: Hold the fire button and inhale through the mouthpiece.
the correct mode and adjust the wattage to a proper range according
3. Charging & Upgrading: The CUBOID Lite adopts new balanced charging system which supports quick charge
capability with max charging current up to 2.0A. Download the latest firmware
connect it with a micro USB cable to upgrade
General settings:
Switch the mode:
press the fire button 3 times to enter into the mode options. Then click
pass/C ockfTEMP(Ni, Ti, , M2, M3) modes. Press the fire button to confirm
After switched to Temp/TCR mode, when it is still blinking, click "
Ni/Ti/SS or MI/M2/M3.
Note: The TEMP-SS mode is especially designed for stainless steel 316 type coil only
Parameter settings:
Under Temp/TCR mode, you're able to adjust the temperature
press the fire button 3 times then click" " button 2 times, the wattage icon will blink. press "+" button first, then
you're free to adjust the wattage by clicking "+ "r
2
Real-time-clock
The CUBOID Lite mod comes with real-time-clock function. And it is displayed in two ways:
digital clock and ana og clock.
Press the fire button 3 times and switch the modes by pressing "+" button. Select the clock
mode Press the fire button 3 times and click "
once to switch between digital clock or analog clock
Under digital clock, press the fire button 3 times and then click"
and date. When it is flashing, click "+" button first and then you're able to adjust by clicking
-p + " button
Set screen protection
When the device is on, simultaneously hold the fire button and "
duration Press the fire button to confirm The screen wil display analog clock in standby
General functions:
Stealth function
When the device is on, simultaneously hold the fire button and "
under stealth, you can stil vape with the display off.
Key lock function
When the device is on, simultaneously press " " and "+" buttons to turn on/off the button Lock function. When Key Lock
is on, regulatory buttons will not work to prevent accidental adjustments
Switch the display
When the device is off, simultaneously press" " and "+"
4
power limit
In Order to protect the atomizer head systematically,
certain Ohm range
Long press the fire button and " button simultaneously to enter into the menu system
CliCk " button 5 times to enter into the power limit setting. Press the fire button to switch
between different Ohm range according to your atomizer head resistance Click " " button
to adjust the limit output.
Indication and protection
Charging Protect(ENU):
While charging, if the temperature Of the device is higher than 45C , it'l display Battery TOO Hot
On the contray, if the temperature is lower than -5C, it'll display Battery Too Cold
While charging, when the temperature Of the device reaches to 50 C or higher, the device wil
stops charging until the temperature drops down to 45 C Or lower
Atomizer Short-circuit protection:
When atomizer short-circuit occurs, the screen will display Atomizer Short
NO Atomizer Alert: When you press the fire button and the screen displays NO Atomizer Found
That mainly because there's no atomizer attached On the battery Or it is not tightly secured
Weak Battery Alert:
When the device is working with the atomizer where battery voltage is under 2 9V, the screen wi
Meanwhile, Output power wil be reduced accord'ngly
6
Precautions:
1. Don't use the device in stormy weather or dust condition
2. Connect the USB port and charger properly. Unplug the charger when the charging
3. Don't put the device in your pocket or handbag directly; don't mix it with coins, jewe ry or other hard objects.
4. The charger and battery may heat when charging, keep away from flammable
Waming:
1. Keep out of reach of children
2. This device is not recommended for use by people under 18 or non-smokers.
3. This device is not suitable for use by pregnant or breast-feeding
4. This device is not suitable for use by people who're allergic or sensitive to nicotine or those who can't use nicotine
products for health reasons
5. This device is not suitable for use by people who has cardiovascular
6. This device is not suitable for use by people who diseases like cardiac dysfunction,
Attention:
1. Only have your device repaired by Joyetech. Do not attempt to repair the unit by yourself as damage or personal
Injury may occur.
2. Do not leave the device in high temperatures or damp conditions,
operation temperature is within OOC to 45'C while charging and -IOC to 600 while in use
3. Do not attempt to combine the device with parts of other brands of e-cigarettes.
and your warranty will be void if any damage caused by this way
8
Manufactured by Joyetech
Made in China
TFT color display
80B
Regulatory
to tum the device on or off
Release the fire button and exhale. Please choose
to your atomizer before use
at wmv.joyetech.com/mvr-software/
" buttons to switch between power/By
" button first then "-k" button to switch between
by clicking "-V/" buttons directly
" buttons
button once, it'll blink. Then click "+" button
" button twice to select time
80.0.
" button. Press " —" button to set the screen protection
button to turn on/off the stealth function
Still, you can vape while it is under key Ock
buttons to turn the display upside down. Redo it to switch
we specially designed the power limit for
POWER
STATE
0.10-0.450
0.46-0
0.96-3.500
STATE
display Weak Battery
is completed
gas, liquid or other materials
women.
disease or respiratory disease.
high blood pressure or diabetes.
as this may damage the device. The appropriate
Joyetech will not take responsibility
Notice for Use:
Thank you for choosing
you require any additional
Joyetech agent, or visit our website at www joyetech com
Product Introduction:
Featuring a large 1 45 inch refined and rich color display with the most advanced vaping system, the Joyetech CUBOID
Lite is such one Ofa kind box mod that aesthetically fits your hand comfortably Powered by a 3000mAh built-in battery,
it handles BOWmax power with a sequence Ofunique features including 2A quick charge, real-time clock, preheat and
nicotine intake calculation and temprature protect for charging
Parameter:
Battery capacity: 3000mAh
Display: 1.45 inch TFT color screen
Output range: 1-BOW
Output modes: Power/Bypass/Temp(Ni, Ti,
Resistance range: 0 05-1 50hm for Temp/TCR
0 1-3 50hm for Power/Bypass
Temperature control: 100-3150C/200-600SF
Depth Of 510 pins applicable:
Buttons
Max charging current: 2 OA
Max output current: 30A
Max output voltage: 9V
Press the fire button 3 times then click"
lock/unlcok the resistance
choose to display current/puffs/total
Under VW mode, you're able to adjust the wattage by pressing "+"P
Press the fire button 3 times and click "—" button once, the electric current icon will blink. Click "+
display current/puffs/total
1 Temp/TCR mode only supports a maximum
resistance is larger than 1 5 ohm.
and 2. When Kantha' wire is applied under TempfTCR
Set TCR value
With the TCR (Temperature
Ti, SS) on your own.
When the device is off, press the fire button and "+ " button simultaneously
setting menu:
1 Press the fire button to switch between TCR MI, M2 and M3;
2 Adjust the TCR value by clicking " — "1"+" buttons;
3 Long press the fire button or leave it for a few seconds to confirm
TCR value range for normal
Note: 1 The above TCR value is 105 multiplied of its actual value
2. Value range is among 1-1000
the display back.
preheat function
Simply long press the fire button and
Click "+ " button once to enter into the Preheat setting menu. Click " —" button once then you're
able to adjust the preheat wattage by clicking "4"/"
the preheat duration setting. Click"
duration by clicking "+"P
0.000 ODOA
Nicotine intake calculation
Long press the fire button and "+" button simultaneously
"+" button twice to enter
onloff this function. When it is on, press the fire button to switch to the second row where you
can set the nicotine strength (0-100 mg/ml) by clicking "
interface, there'll be a small 'emoji' on the top eft It begins with a smile then turns to be sad
when the nicotine intake amouts to a certain degree
When it is
Adjustable timeout duration
Due to different vaping habits, you're al owed to set the timeout duration from 5 to 15 seconds
as you prefer. Long press the fire button and "+ " button simultaneously
system Click "+" button 3 times to enter into the timeout duration setting. Click"
set the duration. Press
Once the duration is set (like 5 seconds), when you hold the fire button and vape over the
pre-set time, it'll display Over 5S protect and shut down automatically. press the fire button
5 times to restart
Low power Alert:
When the battery voltage is under 3 W, the screen will show Battery Low If you continue to press the fire button, it wi
LIMIT
show Battery low Ock, then stop working
low-voltage protection will be unlocked
80.0W
95n 35 ow
14.ow Atomizer Low Alert:
When resistance Ofthe coi is lower than 0.1ohm under VW mode (or < 0 050hm under TC/TCR mode), the screen will
display Atomizer Low
Temperature protection:
Under TC/TCR mode, when the actual coil temperature reaches to the set temperature, the screen will show protect
Device TOO Hot Alert:
When the temperature
Battery using:
1 Please use correct charging equipment
2 Please put the batteries on a hard surface when charging
3 Please turn Off the device
4 Please use dry cloth to clean the battery and its terminals when needed
5 Don't leave the charging batteries unattended
Don't expose the battery to extreme heat, cold or direct sunlight
6
7 Keep away from water or any liquids
Warranty terms:
Please refer to your Joyetech product warranty
Our warranty is not valid for products
Joyetech agrees to provide
1 This warranty provides repair free of charge for defective
from date of purchase by the end user.
2. This warranty may be void as a result of any of the following conditions:
• Customer does not provide warranty
• Merchandise failure or damage is caused due to improper use or unauthorized
• Merchandise failure or damage as a result of excessive force such as dropping
• Merchandise failure or damage as a result of usage outside of recommended
in usage manual).
• Merchandise failure or damage caused by improper use of water or other liquid (see usage manual for operating hstructions).
• Merchandise failure or damage due to usage with non-Joyetech
3. This warranty does not cover personal items or consumable
mouthpiece, cartridge, atomizer
4. This warranty does not cover any non-Joyetech
brand products during the warranty
Joyetech reserves the right of final decision
Joyetech may interpret
CUBOID
Joyetech Please read this manual carefully before use to ensure that your usage is correct. If
information or have any questions about the product or its use, p ease consult your loca
M2, M3)
mode
mode
4 0-5 5mm
" button 3 times, the resistance
Continue to click "—" button once, the electric current icon will blink. Click
vaping time.
" buttons directly.
vaping time
of 1.5 ohm. The device will automatically
mode, the device will also automatically
Coefficient of Resistance) function, you can customize
temperature control coils:
ss (303, 304, 316, 317)
button simultaneously to enter into the menu system.
" buttons Press the fire button to switch to
" button once then you're able to adjust the preheat
" buttons. Long press the fire button to confirm
to enter into the menu system. Click
into the nicotine intake calculation menu. Click"
" button. Under normal vaping
to enter into the menu
the fire button to confirm
Please recharge the battery to reactivate
Of device is higher than 70 C, Output will shut Off automatically
by reputable suppliers
when it is not in use
card. We are not responsible
purchased from third party vendors
repair under warranty pursuant to the following
Joyetech brand merchandise.
card and original receipt of purchase.
components
goods and attachments,
head, lanyard, and leather sheath
brand products. This warranty is only valid for eligible Joyetech
period of 90 days after date of purchase as indicated on proof of purchase
in all warranty cases.
and revise the content of this warranty terms.
lpyetech
Lite User Manual
icon will blink. Press button to
" button to
button to choose to
switch to VW mode when the
switch to POWER mode
your temperature control coils (Ni,
for about 5 seconds to enter into the TCR
TCR Value Range
Material
Nickel 600-700
NiFe 300-400
Titanium 300-400
80-200
3
PREHEAT
DURATION I.os
NICOTINE
STATE
CONC MG,'ML
" button to turn
TIME OUT
5 SEC
6 SEC
7 SEC
" button to
8 SEC
9 SEC
15 SEC
5
As soon as charging has commenced
and display Device TOO Hot.
7
for any damage caused by user error.
terms and conditions:
Warranty period is 90 days
repair.
operating conditions (see precautions
(charger, battery, and power cable).
including but not limited to:
9