Joyetech eGo ONE Bedienungsanleitung

Notice for use:
Thank you for choosing Joyetech! Please read this manual carefully before use to ensure that your usage is correct
If you require any additional information or have any questions about the product or its use, please consult your local
Joyetech agent, or visit our website at www.joyetech
Product Introduction:
Petite yet powerful, eGo ONE is the ONE device made for everyone. The eGo ONE stands out from other different
type of e-cig products in the market in part due to the unique design and functionality
eGo ONE uses two types of changeable atomizer head. Having one atomizer at a Iohm, which is intended for mouth
inhalers who seek the sensation of taking a puff of an analog cigarette, and another at 0.5 sub-ohm for those seeking
an effortless loose draw for creating huge cloud production
eGo ONE
How to Use:
Power on and off: Press the button for 5 times in quick succession,
eGo ONE is ready for use In the same way, eGo ONE will be powered Off after 5 presses
Vaping: Press the button and inhale or vape. When the button is held down, the button light will be on
Charging: Simply charge eGo ONE by connecting it with a computer or a wall adapter via USB cable. When it' s fully
charged, the button light will go out
E-juice fillingO:
Screw Off the atomizer cap from the atomizer base and inject the liquid directly
When you unscrew the eGo ONE base from the atomizer tube, the atomizer head may follow to become loose, so
do remember to tighten it before re-screw the atomizer base on the tube.)
3 eGo ONE
Functions:
Short circuit protection:
1, When the battery charge is low, eGo one wil stop functioning. Please charge the battery to reactivate
2, When the short circuit occurs before working, the button light flashes for 5 times and then powers off.
3, When the short circuit occurs while working, the button light flashes for 3 times before short circuit (reset)
Atomizer protection: eGo one has a 15 second run time protection
pressed for more than 15 second
Low voltage protection: When the battery voltage is less than 3.3V, the button light flashes for 40 times and the
device power-off Press the button can not power on
eGo ONE
5
Cautions:
1 , You need to choose suitable battery which matches eGo ONE sub coil
2, You' d better keep eGo ONE power-off when taking along without use
3, Try not to press the button if eGo ONE is not in use.
4, Only have your eGo ONE repaired by Joyetech
damage to the item and/or personal injury
5, eGo ONE should be operated in dry conditions
between OC(32'F)
6, eGo ONE is designed with authentic Joyetech components.
cause the device to function improperly and/or lead to damage
eGo ONE
7
• Merchandise failure or damage is caused due to improper use or unauthorized repair.
Merchandise failure or damage as a result Of excessive force such as dropping
• Merchandise failure or damage as a result of usage outside of recommended operating conditions (see precautions in
usage manual)
* Merchandise failure or damage caused by improper
instructions)
* Merchandise failure or damage due to usage with non-Joyetech components (charger, battery, and power cable)
3 This warranty does not cover personal items or consumable
mouthpiece, cartridge, atomizer head, lanyard, and leather sheath
eGo ONE
9
com
The innovative
the button light will flash 5 times to indicate
into the cambered
The light will flash 10 times if the button is
DO NOT attempt to repair it on your Own as it may lead to further
between temperatures Of -IOC(14T) to 60C(1400F ) and charged
Applying eGo ONE with unauthorized components
use of water or other liquid (see usage manual for operating
goods and attachments, including but not limited to:
Battery
design of the
Atomizer Head replacemen
Unscrew the atomizer cone,
is ocated on the base, just unscrew it and replace
and clean.
(NOTE: Please do not wash the atomizer head
with water. Simply scrub it with alcohol cotton or
clean dry cloth )
Adjustment of Air Inflow($):
slot.( NOTE: Rotating the ring on the atomizer base clockwise
to decrease the air inflow, and counterclockwise
enlarge the air inflow
Resistance examination:
1, When the resistance at the output end is >50hm, the light flashes slowly if you press the button.
2, When the resistance at the output end is
potential short circuit.
Battery display function:
The light will flash s owy or stay lit when battery quantity is high,
on the contrary, the light flashes in frequency
The battery light flashes red when charging or connecting
USB, and goes out in five seconds when it is fully charged
Warranty
Please consult your Joyetech product warranty card
We are not responsible for any damages caused by human error
Joyetech agrees to provide repair under warranty pursuant
1. This warranty provides repair free of charge for defective Joyetech brand merchandise
from date of purchase by the end user
may
2 This warranty may be void as a result of any of the fol owing conditions:
• Customer does not provide warranty card and original receipt of purchase.
4. This warranty does not cover any non-Joyetech brand products. This warranty is only valid for eligible Joyetech brand
products during the warranty period Of 90 days after date Of purchase as indicated on proof Of purchase
Joyetech reserves the right
content of this warranty terms.
Atomizer Base
eGo ONE CL
(1.Oohm)
eGo ONE CL
(0.50hm)
the atomizer head
to
30hm, the light flashes quickly for 5 times, suggesting
Battery Quantity
600/0-1000/0
0-9%
with
to the following
of final decision in all warranty cases. Joyetech
Atomizer Tube
Mouthpiece
eGo ONE 2
eGo ONE
4
low output or
Light Condition
Stay lit
Slowly flashes
Moderately flashes
Flashes in frequency
eGo ONE 6
terms and conditions:
Warranty period is 90 days
eGo ONE 8
may interpret and revise the
eGoONE 10