powersoft Mezzo Serie Benutzerhandbuch Seite 2

EN
Important Safety Instructions
THE TRIANGLE WITH THE LIGHTNING
OF ELECTRIC SHOCK.
THE TRIANGLE WITH THE EXCLAMATION
IMPORTANT OPERATING OR MAINTENANCE
r THE CE-MARKINDICATES THE COMPLIANCEOFTHE PRODUCTTOALLTHE APPLICABLE
EUROPEAN DIRECTIVES
SYMBOLFOR EARTH/GROUNDCONNECTION.
SYMBOL INDICATING THAT THE EQUIPMENT
SYMBOL FOR CONFORMITY
PARLIAMENTON WASTEELECTRICAL A ND ELECTRONIC EQUIPMENT (WEEE).
-IOOC TO +450C DERATING ABOVE
10% TO 90% HUMIDITY (NON CONDENSING).
DO NOT USE THE UNIT AT ALTITUDES
DO NOT USE THE UNIT IN TROPICAL
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTEMPT TO OPEN
ANY PART OF THE UNIT. NO USER-SERVICEABLE
QUALIFIED SERVICE PERSONNEL.
CONNECTION TO THE MAINS SHALL
PERSON ACCORDING THE NATIONAL
UNIT IS SOLD.
DO NOT USE THIS AMPLIFIER IF THE ELECTRICAL
TO AVOID ELECTRICAL SHOCK, DO NOT TOUCH ANY EXPOSED SPEAKER WIRING WHILE
THE AMPLIFIER IS OPERATING.
DO NOT SPILL WATER OR OTHER LIQUIDS INTO OR ON THE AMPLIFIER.
NO NAKED FLAME SOURCES SUCH AS LIGHTED
AMPLIFIER.
WARNING TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELYATTACHED TO THE
FLOOR/WALL IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.
THIS DEVICE MUST BE POWERED
IN ELECTRICAL NETWORKS COMPLIANT
DISCONNECT THE AC MAINS SOURCE
AMPLIFIER
THE BREAKER NEEDS TO SUPPORT 375 VA PER MEZZO, SO MAX 3 MEZZO PER OUTLET
AT 115V IOA, OR MAX 6 MEZZO PER OUTLET WITH 230V IOA
IT IS HIGHLY RECOMMENDED
PROCEEDING WITH THE SELF CHECK PROCEDURE
THE TESTING SIGNALS MIGHT CAUSE LOUDSPEAKER
OUTPUT TERMINALS ARE HAZARDOUS:
L
REQUIRES INSTALLATION BY AN INSTRUCTED
CLASS2
LEADS.
WIRING
PROPERLY FIT THE AC MAINS PLUG TO THE AMPLIFIER
BEFORE POWERING THIS AMPLIFIER, VERIFY THAT THE CORRECT VOLTAGE RATING IS
BEING USED.
VERIFY THAT YOUR MAINS CONNECTION
RATINGS OF THE DEVICE.
TAKE CARE TO LOCK THE OUTPUT
BOLT IS USED TO ALERT THE USER
POINT IS USED TO ALERT THE
INSTRUCTIONS.
IS FOR INDOOR USE ONLY
WITH DIRECTIVE 2012/19/EC OF THE
350C.
ABOVE 2000 M.
ENVIRONMENT.
PARTS INSIDE. REFER SERVICING
BE DONE ONLY BY A ELECTROTECHNICAL
REQUIREMENTS OF THE COUNTRIES
POWER CORD IS FRAYED OR BROKEN.
CANDLES SHOULD BE PLACED ON THE
EXCLUSIVELY BY EARTH CONNECTED MAINS
TO THE IEC 364 OR SIMILAR RULES
BEFORE ATTEMPTING TO CLEAN ANY PART OF THE
TO UNPLUG THE OUTPUT CONNECTORS
IMPAIRMENTS.
WIRING CONNECTION TO THESE TERMINALS
PERSON AND THE USE OF READY MADE
INLET.
IS CAPABLE OF SATISFYING
TERMINAL BEFORE SWITCHING THE DEVICE
TO THE RISK
USER TO
This unit has been engineered and manufactured to ensure your personal safety.
But IMPROPER USE CAN RESULT IN POTENTIAL
In order not to defeat the safeguards incorporated into this product, observe the
following basic rules for its installation, use and service. Please read these "Important
Safeguards" carefully before use.
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
EUROPEAN
Do not use this equipment near water.
Clean only with a dry cloth.
Do not block any ventilation
•
manufacturer's
Do not install near any heat sources such as radiators, heat registers, stoves,
•
or other apparatus that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
polarized plug has two blades with one wider
type plug has two blades and a third grounding
third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
•
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories
TO
Use only with the cart, stand, tripod, bracket, or table specified by the
•
manufacturer, or sold with the apparatus. When a cart is used, use caution
SKILLED
when moving the cart/apparatus
WHERE THE
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified
required when the apparatus has been damaged in any way, such
as power-supply
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective
earthing connection
Where the MAINS plug or an appropriate
device, the disconnect device shall remain readily operable.
SOCKETS
THE MANUFACTURER
DAMAGES CAUSED TO PERSONS, THINGS
IMPROPER OR MISSING
CONTACT THE AUTHORIZED
EXTRAORDINARY
IT IS ABSOLUTELY
REQUIREMENTS
ACCURATE CHECK BY QUALIFIED
BEFORE
THE POWER
ON.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
ELECTRICAL
openings. Install in accordance with
instructions.
than the other. A grounding-
prong. The wide blade or the
specified by the manufacturer.
combination to avoid injury from tip-over.
service personnel. Servicing is
cord or plug is damaged, liquid has been spilled or objects
coupler is used as the disconnect
CANNOT BE HELD
OR DATA DUE TO AN
GROUND CONNECTION.
SERVICE CENTER FOR ORDINARY
MAINTENANCE.
NECESSARY TO VERIFY THESE
OF SAFETY AND, IN CASE OF DOUBT, REQUIRE AN
PERSONNEL.
SHOCK OR FIRE HAZARD.
the
plug. A
RESPONSIBLE FOR
AND
FUNDAMENTAL