Charging The Battery; Light Functions; Maintenance And Care; Environmental Protection Notes - Calima 46076 Bedienungsanleitung

6.2 CHARGING THE BATTERY

To charge the battery of the mini air pump, plug the USB-C connector
of the charging cable (position 16 in the overview) into the charging
port (position 6 in the overview) of the mini air pump. Insert the
USB-A plug of the charging cable into the output of a USB charger.
Connect the USB charger to a power socket.
During the charging process, a red indicator light ashes in the light
screen (position 1 in the overview) of the mini air pump. When the
battery is fully charged, the indicator light shows a continuous red
light.
6.3 FILLING WITH THE MINI AIR PUMP
Select a suitable adapter for your application. Special feature: Adapter
13 can only be used together with adapter 12, g. 3.
Plug the adapter onto the pump outlet (position 7 in the overview) of
the mini air pump, g. 2.
Fig. 2: Attach adapter to pump outlet
Fig. 3: Adapter for outdoor mattresses
Insert the adapter into the in ation connection of your air mattress etc.
Press the switch (position 3 in the overview) to start the in ation
process.
Do not allow the mini air pump to operate for
longer than 15 minutes. Otherwise the appliance
may overheat and be damaged. Always allow
the mini air pump to cool down completely, at least
20 min.
Switch o the mini air pump when the desired lling level is reached.
6.4 DEFLATING WITH THE MINI AIR PUMP
Select a suitable adapter for your application. Special feature: Adapter
13 can only be used together with adapter 12, g. 3.
Attach the adapter to the suction opening (position 5 in the overview)
of the mini air pump, g. 4.
Fig. 4: Attaching the adapter to the intake opening
8
Insert the adapter into the in ation connection of your air mattress, etc.
Press the switch (position 3 in the overview) to start the de ation
process.
Do not allow the mini air pump to operate for
longer than 15 minutes. Otherwise the appliance
may overheat and be damaged. Always allow
the mini air pump to cool down completely, at least
20 min.
Switch o the mini air pump immediately after
emptying, as there is a risk of overheating.

6.4 LIGHT FUNCTIONS

By repeatedly pressing the switch (position 3 in the overview), you
can switch through the following light functions:
dimmed bright  Flashing  OFF

7. MAINTENANCE AND CARE

7.1 MAINTENANCE
The mini air pump is maintenance-free when used as intended.
Charge the battery of the mini air pump every two months when not
in use.
7.2 CARE
Remove dust and sand from the adapters and connections of the mini
air pump before each use. This will ensure that the connections do not
wear out and remain tight.
Clean the device carefully with a dry cloth. Do not use any liquids or
chemical cleaning agents. Never immerse the device in liquids. Never
allow liquids to run over the appliance or get inside.

8. ENVIRONMENTAL PROTECTION NOTES

Do not dispose of electrical devices with the household
waste! Used electronic and electrical devices must be
collected separately and be disposed of by means of
environmentally appropriate recycling measures.
Consult your local authorities on disposal options of
used electronic and electrical devices.
You are legally obligated to return batteries and
rechargeable batteries. After use, you may return them
to us, a municipal collection point or a point of sale.
Batteries that contain hazardous substances are
marked with a crossed out dust bin and with the
chemical symbol (Cd, Hg or Pb) for the classi cation of
the hazardous heavy metal contained therein.