Albrecht Tectalk Pro-R1 Kurzanleitung Seite 7

Advanced Mode
As per above, but with additional functions: hold MON- +SCAN - buttons
and simultaneously turn on the radio.
Display Functions
Change CTCSS-tone
Change DCS-tone
Set Scan Pause Timer
Set voice control (VOX)
Set Busy Channel Lockout
Set Priority Channel
Set Priority Scan Time
Set Dual Watch mode
Activate Roger Beep
Activate Key Beep
Set Time-Out-Timer
Change Call Alert tone
Set Clone parameters
Change Squelch Level
Change output power
Shortly press PTT + simultaneously UP or DOWN to change output power to HI
(high) or LO (low).
Busy Lock Out (BL) mode (lock channel when busy)
(only in advance mode) BL-Modus avoids transmission when a signal is received.
Besides oFF you can set:
a. Carrier only (CA) (regardless of the subtone)
Transmission is blocked as long as a signal is received on the same channel, regardless of
the subtone used.
Setting
1 to 50, Off
1 to 104, Off
1,2,3,5,10,15,20,30,
45,60,Off
1 to 5, Off
Carrier,CT, DT,Off
1 to 8
1 to 5, Off
1 to 8, Off
On, Off
On, Off
15,30,45,60,90,120,180
,240,Off
1 to 5, Off
Send, Receive, Off
1 to 15, Auto, Off