Intended Use; Scope Of Delivery; Safety Instructions; Risk Of Death - Florabest Rl-2378 Aufbauanleitung

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following operating
instructions.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.

Intended Use

This article is not intended for commercial use.
The article is designed for use in the private
living area, e.g. balcony, terrace or garden.

Scope of Delivery

1 x Wicker Sunlounger
2 x Wheels
Assembly material:
2 x Screws (1)
2 x Cover caps (2)
1 x Allen key (3)
2 x Washers (4)
2 x Guide bearings (5)
1 x Instructions for use

Safety Instructions

Risk of Death!

• Never leave children with the packaging
material without supervision. Risk of suffo-
cation.

Risk of Injury!

• Ensure that the rod (figure D) clicks into place
when you open the article!
• Ensure the correct stability has been achieved
before using the article.
• Place the article on a level surface.
• Take particular care not to trap your fingers
when opening and closing the article. There is
a risk of injury by crushing.
• Ensure that the folding function is correctly
locked before using the article.
• Ensure that the article has been fully opened
before using the article.
10 GB/IE
• The article may only be used with adult super-
vision and may not be used as a toy.
• The article may only be used by one person
at a time.
• Check the article for damage or wear before
each use.
• Do not use the back or armrests as a seat.
• Do not use the article in the vicinity of an
open flame.

Avoid damage to property!

• Secure the article during extreme weather
conditions, e.g. in strong winds.
Store the article in a sheltered room.
Mounting the wheels (Fig. B)
Attach the wheels as shown in figure B.
1. Place the washers (4) on the screws (1).
2. Push the guide bearings (5) and the screws
with the washers into the wheels and tighten
the screws using the Allen key (3).
Note: If the screws are fastened too tightly the
wheels may become blocked and the screws
can break off. The screws should be in place
securely but the wheels still must be able to turn.
3. Attach the cover caps (2) on the centre of the
wheels to cover the screws.

Cleaning and Care

• Please take note that the wood can alter its
characteristics because of changing tempera-
tures, humidity, and other factors.
• The wood used in the article is a natural pro-
duct and it is therefore possible that there will
be small discrepancies in colour and structure.

Care Information

• Clean the article with a soft brush and a mild
soap solution.
• Leave the article to dry completely after
cleaning.
• Treat the article with wood treatment oil from
specialist suppliers. Treat the products several
times every season. The wood must be com-
pletely dry before treatment!
• Follow the manufacturer's instructions on the
selected treatment oil.