Clearing Waste Bin; Troubleshooting - PRO Intellect Technology 6024S Gebrauchsanweisung

1. Open shredder door (see Fig. 1-4, 1-5)
2. Draw the waste bin towards yourself and clear it from paper.
3. Draw the waste bin back and close the door tightly.
Failure
The light below segment of loading
indicator is not on.
The engine is not running.
The engine is constantly working.
Waste bim overloading is on,
sound signal on.
Opened door indicator is on.
Engine overheating indicator is on.
If the mentioned methods of disposal of malfunctions did not help, apply to service centre.
14
Reason
Power switch is OFF.
The paper is too thin.
Start sensor in receiving chute is
clutched with paper.
The waste bin is overloaded.
The door was not close or was
not closed not tightly.
The engine is overheated

Clearing waste bin

Troubleshooting

Solution
Connect the power wire to electricity
network and turn power switcher into
'ON' position.
Terminate a larger number of sheets.
Clear receiving chute from paper
remains.
Clear the waste bin.
Close the door tightly.
Make a 40-min break and continue the
work.